Gas There are 42 products.

Active filters

  • New

Angular flanged gas filter

Use: Natural gas networks with working pressure up to 1.6MPa and temperature range from -30 ° C to + 60 ° C Tests: Water pressure test in accordance with PN-EN 12266-1 body strength 1.5 x PN body tightness 1.1 x PN Air pressure test in accordance with PN-EN 12266-1 body tightness 1.1 x PN Use: Gas filters type PL 7310 (inclined flow) and type PL 7320 (straight flow) are intended for filtering...

  • New

Soft-sealed flanged gas valve

• Stainless steel spindle with rolled thread • Flange connection according to EN 1092-2; (DIN 2501) pressure PN10; PN16 • Product in accordance with EN 13774 • Packing cork protected against dirt penetration • Epoxy coating at least 250 microns in accordance with EN 14901 GSK RAL certificate • Low-friction double-spindle bearing that works horizontally and vertically • Sealing cork...

  • New

Centric butterfly valve for gas wafer type

• Ductile iron body EN-GJS 400-15 • ISO 5211 drive connector (upper ISO flange) • Three plain bearings • Special form of loose shaft lining with shaft crossing • Product designation in accordance with: EN 19, EN 1171 • Stainless steel shaft 1.4021 (not attached) with bottom mounted in blind hole in body   • Terminal connection according to EN 1092-2 (DIN 2501), pressure PN10, PN16 •...

  • New

Ball valve for gas full bore flanged

• Ball seat made of replaceable PTFE • The ball is made of stainless steel grade 1.4301 • NBR or Viton spindle seal + Teflon ring • The construction of the valve allows disassembly • Corrosion protection according to EN 14901 • Stainless steel spindle improved in class 1.4021 • Ductile iron body EN-GJS 350-22-LT • Product according to EN 13774; EN 1983 • Interchangeable spindle seals •...

  • New

Spindle extension rigid

Made of ductile cast iron EN-GJS 400-15, the possibility of shortening the mounting surface area. Galvanized steel squere section 18mm. Ductile cast iron EN-GJS 400-15 coupling mounted on the valve spindle with the split cotter. Extension spindle liner cap pipe bell and thrust washer made of PE. Pipe bell protects against dirt penetration from the ground.

  • New

Straight flanged gas filter

Use: Gas filters type PL 7310 (inclined flow) and type PL 7320 (straight flow) are intended for filtering natural gas (liquid group 1 in accordance with Directive 2014/68 / EU). Filters can be used in overhead installations in vertical or horizontal pipelines. Technical specification: All (100%) filters are leak tested. The tests check the exterior and tightness of the bonnet. All production...

  • New

Soft-sealed flanged gas valve, F5

• Stainless steel spindle with rolled thread • Flange connection according to EN 1092-2; (DIN 2501) pressure PN10; PN16 • Product in accordance with EN 13774 • Packing cork protected against dirt penetration • Epoxy coating at least 250 microns in accordance with EN 14901 GSK RAL certificate • Low-friction double-spindle bearing that works horizontally and vertically • Sealing cork...