Flat grates are made of high-quality PE/PP recycled material. They are used for landscaping, paths, gardens, parking lots. The recommended use of grass grates is on driveways, paths in parks, access routes for rescuers, parking lots, animal feedlots (pastures for animals), as they increase the load-bearing capacity of the soil even on wet terrain and prevent the destruction of the lawn. For...
Filters/strainers There are 5 products.
The purpose of the strainer is to ensure the retention of particles in the pipework. The filtration is determined by the stainless steel mesh size. Regular emptying of the basket is required in order to avoid particles accumulating in the screen.
- Ball valveskeyboard_arrow_downkeyboard_arrow_up
- Check valves
- Gate valves
- Pressure reducing valves
- Suction basketkeyboard_arrow_downkeyboard_arrow_up
- Assembly and disassembly pieces
- Pipe separator
- Resilient Seated Gate Valves
- Water supply fittings accessories
- Fine sanitary materialkeyboard_arrow_downkeyboard_arrow_up
- Solenoid valveskeyboard_arrow_downkeyboard_arrow_up
- Ductile iron pipes
- Pipes and fittingskeyboard_arrow_downkeyboard_arrow_up
- Ball valves
1) Body made in brass according to UNE-EN 1982. 2) Chrome plated according to EN 248. 3) Guided outlet noiseless D40 ceramic cartridge. 4) Anti-lime M24x1 plastic aerator with chrome plated brass cover. 5) Fitted with fixing brass made eccentrics nuts. 6) Maximum temperature: 85 °C. 7) Max. recommended temp.: 65 °C. 8) Maximum pressure: 10 bar. 9) Minimum pressure: 0,5 bar. 10)...
COMPONENTS AND MATERIALS AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. - Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen key. OPERATION Suitable for hotel or residential bathrooms. No specific...
Pistol‐type hot air hair dryer with wall mount. Both the mount and the hair dryer are made in black ABS plastic. The mount is fixed to the wall with two screws, for which two holes need to be drilled in the wall using a 6 mm drill bit. On the front of the hair dryer mount, there is a main switch with an indicator light and two shaver sockets, a 110V flat pin and the other a 230V round or flat...
APPLICATION Heating system and undrinkable domestic water, steam and other compatible fluids. GENERAL CHARACTERISTICS "Y" body and bonnet in cast iron from DN15 to DN300 and in ductile iron for DN350 and DN450 Dismountable stainless steel screen. Drain plug G1/2 (DN15-100); G3/4 (DN125-400) Flanged ends PN 16. WORKING CONDITIONS Maximum working pressure :16 bar Maximum temperature: -15°C /...
APPLICATION Heating system and undrinkable domestic water, steam and other compatible fluids. GENERAL CHARACTERISTICS Filter equipped with a magnetic shaft for sensing the metal particules contained in the fluid. "Y" body and bonnet in cast iron from DN15 to DN300 and in ductile iron for DN350 and DN450. Epoxy coating RAL 5019 with thickness 80-100µm. Dismountable stainless steel screen. Drain...