Climate control There are 36 products.

Manual air vent 1/8"

Avtomatski odzračevalni ventil, lonček z zapornim čepom

Bimetallic contact thermostat

Ball valve with 2 pieces connector

Ball angle valve M-F with 2 pieces detachable connector

Pressure relief valve for water heater

1. Brass construction acc/ UNE-EN 12165 nickel plated. 2. Gas (BSP) threaded M-F ends acc/ ISO 228/1. 3. Maximum working pressure 16 bar (PN 16). 4. Working temperature from -20ºC to 110ºC 5. Standard tare at 8 bar ±0.5 bar. 6. Outlet for hose connection.  

3 way motorized-zone valve with 5 cores wire

1. The zone valve is intended for use in control terminal units such as fan-coil and boxes in heating, ventilation, and air conditioning systems. 2. The valves can be used with hot and cold water in the temperature range from 0 ºC (nonfreezing) to 94 ºC. 3. The valve is driven by hysteresis synchronous motor with spring return. 4. There are two types of motorized valves: normally closed 2-way...

Stainless steel manifold

Body of Stainless Steel AISI 304L Connection parts of brass CW617N EPDM seals and silent blocks Polymer Hand wheels and caps Derivation connection: G 3/4” (ISO 228) EUROKONUS Connections on line: Female 1" (ISO 228) Max. working pressure: 6 bar Max circuit test pressure: 10 bar (at 20°C) Differential pressure Δp max.: 1 bar Maximum working temperature: 70°C Fluid allowed: Water or Water +...

Expansion tank 8l 1"

USE: The 8-liter expansion tank for cold water is designed to be mounted on a small hydrophoric pump with accessories. As a result of such assembly, we get a very compact and small hydrophore set. Multipurpose tank with replaceable membrane for closed heating systems. An expansion tank with a replaceable membrane is one of the elements of protection of closed central heating systems....

Universal vertical thermostatic mixing valve

Applications examples: For plants with solar panels, stoves and heat pumps. For distribution plants of hot water for sanitary use, showers, washbasin, etc. For small plants of floor heating. 1. Mixing device with temperature setting and stop water supply according EN 1111 standard. 2. Maintains the mixed water temperature constant in all the plumbing systems. 3. Extractable cartridge and...

Dynamic balancing valve

1. The balancing valve is a single component device having adjustment functions and that measures cold and hot fluids transiting inside closed and open systems with following advantages: - Maintaining a constant flow rate at the device value, within a differential pressure range between upstream and downstream - The flow rate value is set through a cartridge adjustable to ensure the design flow...

Multifunction magnetic filter

1. Multifunction magnetic filter for hydraulic circuits 2. Polyamide PA66 + 30% FV diverter body 3. Cartridge body in polyamide PA66 + 30% FV 4. Cap construction in polyamide PA66 + 33% FV 5. Stainless steel filter AISI 304, 800 microns 6. EPDM PEROX as a hydraulic seal 7. Magnetic element Neodymium RE35 11.000 Gauss. 8. Brass ball valves according UNE-EN 12165 9. Manual air vent valve on...