Balancing valves There are 5 products.

Balancing valves

Active filters

  • New

Dynamic balancing valve

1. The balancing valve is a single component device having adjustment functions and that measures cold and hot fluids transiting inside closed and open systems with following advantages: - Maintaining a constant flow rate at the device value, within a differential pressure range between upstream and downstream - The flow rate value is set through a cartridge adjustable to ensure the design flow...

  • New

Static balancing valve

1. The balancing valve is a single component device having adjustment functions and that measures cold and hot fluids transiting inside closed and open systems with following advantages: - Micrometric adjusting of the transfer flow. - Indicator of calibration reading of numerical value on the valve's hand wheel. - Possibility of checking circuit via indirect measuring of flow rate using...

  • New

Static balancing valve – Flanged ends DIN PN 16

1. Variable orifice cast iron double regulating globe valve according to BS 7350 standard. 2. Designed to regulate and balance the flow in heating and cooling with high precision, which means a more uniform temperature distribution. 3. Body and Bonnet in Ductil Iron. 4. PN16 flanges according to EN 1092. 5. Face to Face according to EN558-1 series 1. 6. Non-rising stem. Compact design. 7. EPDM...

  • New

Static balancing valve PN20

1. The balancing valve is a single component device having adjustment functions and that measures cold and hot fluids transiting inside closed and open systems with following advantages: • Micrometric adjusting of the transfer flow. • Indicator of calibration reading of numerical value on the valve's hand wheel. • Possibility of checking circuit via indirect measuring of flow rate using...

  • New

BSE threaded bronze balancing valve PN20

The proposed valves have an oblique seat which offers a good adjustment precision and a resistance lower than the valves with a straight seat: head losses are small, flow more important for a same DN leads. Mounting on pipes is preferred direction indicated by an arrow on the body. The balancing valve can be used as a « stop valve. A thrust allows memorizing the valve adjustment, without...