1. Ball valve with full bore.
2. Brass construction acc./ to UNE-EN 12165 chrome plated.
3. Threaded male-female ends gas (BSP) according to ISO 228/1.
4. Working by means of steel lever handle.
5. Working temperature from -20ºC to 110ºC.
6. Maximum working pressure 25 bar (PN 25).
7. PTFE Seats.
1. Stainless steel full port ball valve, 2 piece.
2. Thread ends according to ISO 7-1 (EN 10226-1) M – F.
3. Made of stainless steel 1.4408 (CF8M).
4. Ball seats PTFE + 15 % G.F.
5. Blow-out proof stem.
6. O’ring in the stem FKM (Viton).
7. Stem gasket PTFE.
8. Locking system.
9. Max. Working pressure 63 bar.
10.Working Temperature –25 ºC + 180 ºC.
1. Bibcock ball valve to hose connection.
2. Brass construction acc/ UNE-EN 12165 chrome plated.
3. Gas (BSP) threaded male inlet acc/ ISO 228/1.
4. Fitting two-piece with diffuser for connect hose and 3/4" male threaded.
5. Working by means of steel lever handle.
6. Non ejectable stem.
7. PTFE Seats.
8. Working temperature from -20ºC to 100ºC.
9. Maximum working pressure 16 bar (PN-16).
10....
1. Ball valve with full bore. 2. Brass construction acc/ to UNE-EN 12165 nickel plated. 3. Threaded ends gas (BSP) female-female according to ISO 228/1 4. 2/3 ways "L" (3272E) / "T" (3282E) shape spherical seal assembled on 4 PTFE seats. 5. Possible direct mount actuator connection ISO 5211 and DIN 3337. 6. Working by means of steel lever handle. 7. Working temperature from -10ºC to 150ºC. 8....
1. Ball valve with full bore. 2. Brass construction acc/ to UNE-EN 12165 nickel plated. 3. Threaded ends gas (BSP) female-female according to ISO 228/1 4. 2/3 ways "L" (3272E) / "T" (3282E) shape spherical seal assembled on 4 PTFE seats. 5. Possible direct mount actuator connection ISO 5211 and DIN 3337. 6. Working by means of steel lever handle. 7. Working temperature from -10ºC to 150ºC. 8....
error Your review appreciation cannot be sent