Solar foot and shower tower with 1 shower head and manual control
High resistant PHD plastics structure
Anthracite black
Single lever mixer with ceramic disc cartridge for shower
Tap with manual opening/closing with ceramic disc headvalve for foot shower
8 l/min flow limiter for shower, 5 l/min foot washer
Trusted client
Trusted delivery
It is a shower made of HPL, a latest generation technopolymer with low environmental impact and very high resistance to corrosion and impact.
Inside it is equipped with a 30L water tank which is heated by the exposure to the sun. With optimal installation and temperature settings, the tank can be heated from 12 °C to 34 °C within one hour.
The 15-second self closing tap allows for additional water saving, and the shower head is limited to 8 L/min and the foot washer to 5 L/min.
The special chrome plating for this tap can also withstand marine environments, in accordance with EN 248 standard.
The single lever ceramic disc mixer allows the water to be mixed without being too hot on HOT days. This means that you can avoid using all the water in the tank in a short time and thus extend its use.
Very easy to install, and equipped with expansion anchors. Lightweight and easily transportable to the point of installation. Low price for a product that will last a long time.
TECHNICAL CHARACTERISTICS
Pressure range: 1-6 bar (recommended 2-4 bar)
Temperature operating range: 5-65°C
Water flow: 8 l/min
Water flow time (only self-closing models): 15+/-5 sec @ 3 bar (shower)
8+/-2 sec @ 3 bar (foot washer)
SOLAR SHOWER COLUMN WORKING PRINCIPLE
The structure of the shower column acts as a water reservoir, which is naturally heated by exposure to sunlight. Mixing for the shower takes place between the cold water supply and that of the internal tank. The foot washer supplies only cold water. ATTENTION: In the event of prolonged exposure to sunlight, the temperature of the water in the tank could become quite high and cause damage to the user: POSITION THE MIXER IN THE COLD POSITION BEFORE OPENING THE WATER AND INCREASING PROGRESSIVELY TO OBTAIN THE DESIRED TEMPERATURE. Following the gradual heating of the water in the tank it is possible to leak it from the shower head, due to its natural increase in volume: this is not a malfunction of the product. Do not use the shower in the event of a storm: danger of electrocution. The shower column has a dual function safety valve, the first of which consists in closing with the increase in pressure. The second is the cap function for emptying the internal tank.
16 other products in the same category:
Professional dryer for agriculture, industry or...
The dryer is equipped with automation, which regulates and controls the drying of fruits, vegetables, herbs, pasta, laboratory samples, etc... The automation adjusts the operation of the dryer based on external factors and the fruits and products being dried. Due to complete automation, the drying device is very economical and fast. The automatic dryer protects the fruit from overheating, which...
Flexible, quick-set spill tank
Conventional spill tank are made of steel, stainless steel, plastic. Spill tanks made of these materials require the use of forklifts to move them to another location. Sometimes, however, moving is simply very difficult or impossible due to the dimensions. Flexible, quick-set spill tanks allow one worker to carry and set them up. By placing flexible containers under barrels, IBC tanks, tanks,...
KLIP Single lever sink mixer
Features: 1) Body and spout made of brass according to UNE-EN 1982. 2) Handle made of Zamak. 3) Chrome-plated according to EN 248. 4) Built-in Ø40 ceramic silent cartridge. 5) Aerator made of M24x1 plastic with anti-calcification system. Brass body, chrome plated. 6) Equipped with 35 cm long flexible hoses (M10x1; G ⅜”) made of stainless steel. Mounting kit. 7) Minimum flow: 12 l / min...
Angle ball valve for gas, M-F
1. Brass according to UNE-EN 12164 - 12165 2. Chrome-plated surface finishing 3. NBR joints according to EN 549 4. PTFE seats 5. Thread ends male-female according to ISO 7/1 (EN 10226-1) 6. Guaranteed for the use of Natural Gas 7. Pressure class MOP 5 (0 to 5 bar) 8. Work temperature: from -20ºC to 60ºC 9. The valves can be blocked (at closed position) and sealed 10. Stem with double NBR...
Dryer for walnuts, hazelnuts, almonds, chestnuts
ADVANTAGES OF DRYING IN OUR DRYER: - Nuts can be dried regardless of weather conditions. - Nuts that are dried in a dryer are dried more evenly, which reduces yield losses as well as income. - Nuts that are dried in a drying room are of better quality than those that are dried outdoors with the help of sunlight. DIMENSIONS: - L/W/H = 1596 mm x 1139 mm x 2884 mm
Drying device, dryer for walnuts, hazelnuts,...
The dryer is the result of many years of development and testing. It is developed and manufactured in Slovenia, Europe. It is made of quality stainless materials that guarantee a long service life. The dryer is equipped with automation that regulates and controls the drying of walnuts, hazelnuts, and fruit. Automation adjusts the operation of the dryer based on external factors and the fruits...
Single lever wash-basin mixer, Ge 2, Genebre
1) Body made in brass according to UNE-EN1982 2) Handle made in Zamak. 3) Chrome plated according to EN 248. 4) Guided outlet noiseless Ø40 ceramic cartridge. 5) Anti-lime M24x1 plastic aerator with chrome plated brass cover. 6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.:...
Pressure relief valve for water heater
1. Brass construction acc/ UNE-EN 12165 nickel plated. 2. Gas (BSP) threaded M-F ends acc/ ISO 228/1. 3. Maximum working pressure 16 bar (PN 16). 4. Working temperature from -20ºC to 110ºC 5. Standard tare at 8 bar ±0.5 bar. 6. Outlet for hose connection.
3 way motorized-zone valve with 5 cores wire
1. The zone valve is intended for use in control terminal units such as fan-coil and boxes in heating, ventilation, and air conditioning systems. 2. The valves can be used with hot and cold water in the temperature range from 0 ºC (nonfreezing) to 94 ºC. 3. The valve is driven by hysteresis synchronous motor with spring return. 4. There are two types of motorized valves: normally closed 2-way...
Hand pump 23 l/min
Maximum capacity: 23 l/min Maximum lifting height: 24 m discharge port: 1"x1" Technical data: Operating temperature range 35°C material version: Cast iron housing Cast iron piston
error Your review appreciation cannot be sent