Hand pump 23 l/min
Manual pumps, also known as vane pumps, are suction and force pumps and which feature allows water to be sucked from a depth of up to 7 meters and can also be pumped under pressure. Performance and pressure parameters depend on the size of the pump. Pumping takes place thanks to the turning and turning movement of the wings located in the casing. This movement is transmitted from the handle mounted centrally on the pump lid. K pumps are mounted to a vertical wall or other supporting structure, but they can also be used as portable ones for emptying barrels and other tanks.
Trusted client
Trusted delivery
Maximum capacity: 23 l/min
Maximum lifting height: 24 m
discharge port: 1"x1"
Technical data:
Operating temperature range 35°C
material version:
Cast iron housing
Cast iron piston
16 other products in the same category:
Check valve with filter York type
1. Check valve. 2. Brass construction acc/ UNE-EN 12165. 3. Thread ends gas (BSP) female acc/ ISO 228/1. 4. Working temperature from -20ºC to 100ºC. 5. Suitable for domestic water services, heating on air-conditioning plants and compressed air systems. 6. It can be fitted in horizontal, vertical or oblique position. 7. With inlet strainer. 8. NBR sealing (rubber) 65 shore. 9. Stainless steel...
Dryer for nuts, fruit, pasta, vegetables, hazelnuts,...
The dryer is the result of many years of development and testing. It is developed and manufactured in Slovenia, Europe. It is made of quality stainless materials that guarantee a long service life. The dryer is equipped with automation that regulates and controls the drying of walnuts, hazelnuts, and fruit. Automation adjusts the operation of the dryer based on external factors and the fruits...
DRYER, DRYER FOR NUTS, HAZELNUTS, CHESTNUTS, ALMONDS...
The dryer is the result of many years of development and testing. It is developed and manufactured in Slovenia, Europe. It is made of quality stainless materials that guarantee a long service life. The dryer is equipped with automation that regulates and controls the drying of walnuts, hazelnuts, and fruit. Automation adjusts the operation of the dryer based on external factors and the fruits...
Solar foot and shower tower with 1 shower head and...
It is a shower made of HPL, a latest generation technopolymer with low environmental impact and very high resistance to corrosion and impact. Inside it is equipped with a 30L water tank which is heated by the exposure to the sun. With optimal installation and temperature settings, the tank can be heated from 12 °C to 34 °C within one hour. The 15-second self closing tap allows for additional...
3 way motorized-zone valve with 5 cores wire
1. The zone valve is intended for use in control terminal units such as fan-coil and boxes in heating, ventilation, and air conditioning systems. 2. The valves can be used with hot and cold water in the temperature range from 0 ºC (nonfreezing) to 94 ºC. 3. The valve is driven by hysteresis synchronous motor with spring return. 4. There are two types of motorized valves: normally closed 2-way...
Stainless steel manifold
Body of Stainless Steel AISI 304L Connection parts of brass CW617N EPDM seals and silent blocks Polymer Hand wheels and caps Derivation connection: G 3/4” (ISO 228) EUROKONUS Connections on line: Female 1" (ISO 228) Max. working pressure: 6 bar Max circuit test pressure: 10 bar (at 20°C) Differential pressure Δp max.: 1 bar Maximum working temperature: 70°C Fluid allowed: Water or Water +...
Pressure relief valve for water heater
1. Brass construction acc/ UNE-EN 12165 nickel plated. 2. Gas (BSP) threaded M-F ends acc/ ISO 228/1. 3. Maximum working pressure 16 bar (PN 16). 4. Working temperature from -20ºC to 110ºC 5. Standard tare at 8 bar ±0.5 bar. 6. Outlet for hose connection.
Professional dryer for drying fruit, herbs, pasta,...
The dryer is equipped with automation, which regulates and controls the drying of fruits, vegetables, herbs, pasta, laboratory samples, etc... The automation adjusts the operation of the dryer based on external factors and the fruits and products being dried. Due to complete automation, the drying device is very economical and fast. The automatic dryer protects the fruit from overheating, which...
Dryer for walnuts, hazelnuts, almonds, chestnuts
ADVANTAGES OF DRYING IN OUR DRYER: - Nuts can be dried regardless of weather conditions. - Nuts that are dried in a dryer are dried more evenly, which reduces yield losses as well as income. - Nuts that are dried in a drying room are of better quality than those that are dried outdoors with the help of sunlight. DIMENSIONS: - L/W/H = 1596 mm x 1139 mm x 2884 mm
Garden bibcock quick connector chrome handle with...
Guaranteed for the use of cold and hot water80ºC Maximum Pressure: 8 bar20ºC Maximum Pressure: 16 barMinimum Temperature -10ºCNominal Pressure: PN 16 bar (200PSI)Threads according to ISO 228/1 (DIN259)Quick closing on both handles (1/4 turn)Packing gland in the stem Body and bonnet in nickel-plated brass (UNE EN 12165)
Angle ball valve for gas, M-F
1. Brass according to UNE-EN 12164 - 12165 2. Chrome-plated surface finishing 3. NBR joints according to EN 549 4. PTFE seats 5. Thread ends male-female according to ISO 7/1 (EN 10226-1) 6. Guaranteed for the use of Natural Gas 7. Pressure class MOP 5 (0 to 5 bar) 8. Work temperature: from -20ºC to 60ºC 9. The valves can be blocked (at closed position) and sealed 10. Stem with double NBR...
Polymer manifold
1. The Polymer manifold for floor systems enables parallel feed of terminal fluidic terminals. 2. Limited dimensions that enable the insertion in boxes to be walled in partitioning walls 3. Manual or automatic on-off interception of the single circuits. 4. Adjustment of the flow in transit for balancing between the various circuits by means of flowmeters mounted on the manifold and equipped...
error Your review appreciation cannot be sent