PN 6. Body construction stainless steel AISI 304L. Brass thermostatic valve and conexions UNE-EN 12165. EPDM joints. Gas threaded ends (BSP) ISO 228/1. Conections line, male 1", derivation connections male G3/4" euroconus. Derviation connections 3 up to 13 ways. Polymer hand wheels and caps. Maximum working pressure 6 bar. Maximum working temperature 70ºC.
The WQ 250F pump is a compact submersible pump designed for pumping dirty, rainy and gray water containing organic pollutants with a maximum diameter not exceeding 18mm. WQ 250F has a float control which controls its activation depending on the level of the pumped medium and protects the pump against dry running. The pump is additionally equipped with an overcurrent protection on the power...
1. Maximum working pressure 10 bar (PN2. Brass according to UNE-EN 12165.
3. Thread female ends gas (BSP) acc/ ISO 228/ 1.
4. NBR 65 Sh sealing.
5. Working temperature from 0ºC to 90ºC.
6. Suitable for all kinds of hydraulic and pneumatic installations.
1. Brass according to UNE-EN 12164 - 12165
2. Chrome-plated surface finishing
3. NBR joints according to EN 549
4. PTFE seats
5. Thread ends male-female according to ISO 7/1 (EN 10226-1)
6. Guaranteed for the use of Natural Gas
7. Pressure class MOP 5 (0 to 5 bar)
8. Work temperature: from -20ºC to 60ºC
9. The valves can be blocked (at closed position) and sealed
10. Stem with double NBR...
It is a shower made of HPL, a latest generation technopolymer with low environmental impact and very high resistance to corrosion and impact.
Inside it is equipped with a 30L water tank which is heated by the exposure to the sun. With optimal installation and temperature settings, the tank can be heated from 12 °C to 34 °C within one hour.
The 15-second self closing tap allows for additional...
OPERATING CONDITIONS
- Liquid temperature up to 35°C
(for home use according to EN 60335-2-41)
Max. liquid temperature: 35°C (for other uses)
- Ambient temperature up to 40°C
MOTOR
- r.p.m. 3600
- Start system recoil
- Tank capacity 3,6 lt
MATERIALS
- Pump body Aluminium
- Motor Support Aluminium
- Impeller Cast Iron
- Mechanical seal Ceramic
- Graphite/NBR
The problem with works, if we focus on construction, is that these works take place in a certain area for a certain period of time. The construction of a standard anti-noise fence itself would make the construction project (construction of a house, hospital, school or park) much more expensive, and a standard anti-noise fence would also get in the way in certain parts and prevent the rapid...
Features:
1) Body and spout made of brass according to UNE-EN 1982.
2) Handle made of Zamak.
3) Chrome-plated according to EN 248.
4) Built-in Ø40 ceramic silent cartridge.
5) Aerator made of M24x1 plastic with anti-calcification system. Brass body, chrome plated.
6) Equipped with 35 cm long flexible hoses (M10x1; G ⅜”) made of stainless steel. Mounting kit.
7) Minimum flow: 12 l / min...
1) Body made in brass according to UNE-EN1982
2) Handle made in Zamak.
3) Chrome plated according to EN 248.
4) Guided outlet noiseless Ø40 ceramic cartridge.
5) Anti-lime M24x1 plastic aerator with chrome plated brass cover.
6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended temp.:...
Ongoing climate change is causing more and more extreme phenomena - from droughts to torrential rains. Retention, i.e. the possibility of temporary retention of water is made possible by a line of flexible tanks. A well-organized reservoir not only enables the reuse of rainwater, improves the water balance or reduces costs, but also limits local flooding. The flexible, quick-installation tank...
Cooler with larger dimensions that provides high stability and durability.
Great hygienic protection through a special shell with anti-vandalism finish.
Height of the water jet can be regulated through the high precision valve.
The separation between the push button and the water jet provides more comfort.
Easily regulated cold water temperature (thermostat).
Furthermore the possibility to...
PN 6. Body construction stainless steel AISI 304L. Brass thermostatic valve and conexions UNE-EN 12165. EPDM joints. Gas threaded ends (BSP) ISO 228/1. Conections line, male 1", derivation connections male G3/4" euroconus. Derviation connections 3 up to 13 ways. Polymer hand wheels and caps. Maximum working pressure 6 bar. Maximum working temperature 70ºC.
error Your review appreciation cannot be sent