Flexible, quick-to-install tanks for rainwater, agriculture, livestock, horticulture, fruit growing or industry
Flexible quick-set tanks are made of special PVC material, welded with HF technology. The tanks are suitable as rainwater storage tanks for use in agriculture, horticulture, fruit growing, vegetable growing for irrigation needs. In the months of heavy rainfall, rainwater can be stored in flexible, quickly set-up tanks and later used for irrigation, or water can be stored in them for watering and drinking livestock (*the water must be filtered and analyzed).
Trusted client
Trusted delivery
Ongoing climate change is causing more and more extreme phenomena - from droughts to torrential rains. Retention, i.e. the possibility of temporary retention of water is made possible by a line of flexible tanks. A well-organized reservoir not only enables the reuse of rainwater, improves the water balance or reduces costs, but also limits local flooding. The flexible, quick-installation tank is easy to install and at the same time durable, it is a modern solution that does not require construction work and reduces the necessary formalities to a minimum.
The design of flexible water collection tanks works well in many applications. For the line of industrial holding tanks, tanks (larger than standard, small domestic holding tanks) we used materials of maximum resistance. The DN80 filling connection ensures an adequate supply of rainwater, and an additional flange with a section of 15 cm allows inspection of the tank and facilitates cleaning procedures. Water, rainwater is pumped from the tank via a DN50 connection with a 2" valve, and if desired, the tank can also be equipped with additional connections.
Features:
Construction work - not required:
A flexible tank mainly requires a flat surface. It can be applied to grass, concrete slabs or sand.
Assembling the tank in 30 minutes:
After receiving the tank, simply unfold it on each side and easily install the connections. After 30 minutes, the tank will be ready to fill!
Resistance to UV radiation:
The PVC fabric is protected with a special varnish that extends its life when exposed to UV radiation.
Easy transport:
The tank can be moved easily and quickly.
Temperature resistance:
The tanks are resistant to negative temperatures: up to -30°C.
Individuality:
In addition to standard capacities, we offer custom tank production - so that they fit where you need them most.
Joints welded with HF technology:
The use of high-frequency (HF) welding ensures a permanent connection of fabrics at key points of the product.
Durable fabric: Special technical fabric with polyester mesh and PVC blend coating provides the necessary durability.
Standard tank volumes:
The tanks are manufactured in standard volumes from 10m3 to 250m3.
Standard dimensions, volume, standard connections, maximum height, weight
|
V (m3) |
A x B (m) |
C (m) |
kg |
|
10 |
6,50 x 2,90 |
0,8 |
63 |
|
15 |
5,90 x 4,45 |
0,8 |
83 |
|
25 |
6,00 x 5,90 |
1,0 |
107 |
|
50 |
10,00 x 5,90 |
1,1 |
171 |
|
75 |
9,20 x 8,90 |
1,2 |
232 |
|
100 |
11,20 x 8,90 |
1,2 |
280 |
|
150 |
11,80 x 11,80 |
1,4 |
387 |
|
200 |
15,10 x 11,80 |
1,4 |
491 |
|
250 |
18,50 x 11,80 |
1,4 |
599 |
PL_NAM_REZ_FLE
No customer reviews for the moment.
16 other products in the same category:
Single lever wash-basin mixer, Ge 2, Genebre
1) Body made in brass according to UNE-EN1982 2) Handle made in Zamak. 3) Chrome plated according to EN 248. 4) Guided outlet noiseless Ø40 ceramic cartridge. 5) Anti-lime M24x1 plastic aerator with chrome plated brass cover. 6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.:...
€84.90
Tax included
KLIP Single lever sink mixer
Features: 1) Body and spout made of brass according to UNE-EN 1982. 2) Handle made of Zamak. 3) Chrome-plated according to EN 248. 4) Built-in Ø40 ceramic silent cartridge. 5) Aerator made of M24x1 plastic with anti-calcification system. Brass body, chrome plated. 6) Equipped with 35 cm long flexible hoses (M10x1; G ⅜”) made of stainless steel. Mounting kit. 7) Minimum flow: 12 l / min...
€145.90
Tax included
- New
Professional dryer for drying fruit, herbs, pasta,...
The dryer is equipped with automation, which regulates and controls the drying of fruits, vegetables, herbs, pasta, laboratory samples, etc... The automation adjusts the operation of the dryer based on external factors and the fruits and products being dried. Due to complete automation, the drying device is very economical and fast. The automatic dryer protects the fruit from overheating, which...
3 way motorized-zone valve with 5 cores wire
1. The zone valve is intended for use in control terminal units such as fan-coil and boxes in heating, ventilation, and air conditioning systems. 2. The valves can be used with hot and cold water in the temperature range from 0 ºC (nonfreezing) to 94 ºC. 3. The valve is driven by hysteresis synchronous motor with spring return. 4. There are two types of motorized valves: normally closed 2-way...
€90.90
Tax included
Bottom valve
1. Maximum working pressure 10 bar (PN2. Brass according to UNE-EN 12165. 3. Thread female ends gas (BSP) acc/ ISO 228/ 1. 4. NBR 65 Sh sealing. 5. Working temperature from 0ºC to 90ºC. 6. Suitable for all kinds of hydraulic and pneumatic installations.
€12.45
Tax included
- New
- New
Angle ball valve for gas, M-F
1. Brass according to UNE-EN 12164 - 12165 2. Chrome-plated surface finishing 3. NBR joints according to EN 549 4. PTFE seats 5. Thread ends male-female according to ISO 7/1 (EN 10226-1) 6. Guaranteed for the use of Natural Gas 7. Pressure class MOP 5 (0 to 5 bar) 8. Work temperature: from -20ºC to 60ºC 9. The valves can be blocked (at closed position) and sealed 10. Stem with double NBR...
€6.95
Tax included
Portable flood barrier 10,0 m, ø 40 cm
Flood barriers are resistant to difficult weather conditions such as heavy rain or UV radiation. The mobile flood barrier, 10.0 meters long and 40 cm in diameter, allows you to quickly and effectively secure the area against flooding. It’s made of flexible PVC fabric with a weight of 650 g/m², making it sufficiently durable, but also simple and easy to assemble/disassemble. Flood barriers are...
Stainless steel manifold
Body of Stainless Steel AISI 304L Connection parts of brass CW617N EPDM seals and silent blocks Polymer Hand wheels and caps Derivation connection: G 3/4” (ISO 228) EUROKONUS Connections on line: Female 1" (ISO 228) Max. working pressure: 6 bar Max circuit test pressure: 10 bar (at 20°C) Differential pressure Δp max.: 1 bar Maximum working temperature: 70°C Fluid allowed: Water or Water +...
€240.11
Tax included
Flexible quick-set tanks are made of special PVC material, welded with HF technology. The tanks are suitable as rainwater storage tanks for use in agriculture, horticulture, fruit growing, vegetable growing for irrigation needs. In the months of heavy rainfall, rainwater can be stored in flexible, quickly set-up tanks and later used for irrigation, or water can be stored in them for watering and drinking livestock (*the water must be filtered and analyzed).
error Your review appreciation cannot be sent