1. Temperature setting:
This controller has wide range of set temperature, you can select any temperature you need. The graduations on the housing of the controller indicate different temperature set points, following is the corresponding figure of the room temperature and graduation for
reference:
Room Temp. (ºC): 6 12 16 20 24 28
Graduation: * 1 2 3 4 5
After finish the setting, the controller will modulate the temperature accurately.
For example:
- If you set "3", the room temperature will keep at about 20ºC
- If you want the room temperature at 16ºC, set "2"
- If you need a higher temperature, room temperature 24ºC, then move to “4”
2. Night setting:
In order to improve the comfort and save energy, when at night or no one staying in the room, the temperature should be set lower.
3. Ventilation:
During in winter, if the room requires ventilation for a long time, the controller should be set to the lowest position "*'' to save energy.
4. Anti-freezing protection:
If there are no people in the room for a long time, the controller should be set to the lowest position "*'' to keep the room temperature around 6ºC and prevent from freezing.
5. Cleanness:
The controller should be kept ventilated so as to insure accurately modulation. Use soft cleanser to clean the housing; ethanol, decolorant or organic liquid is forbidden.
error Your review appreciation cannot be sent