The WQ 250F pump is a compact submersible pump designed for pumping dirty, rainy and gray water containing organic pollutants with a maximum diameter not exceeding 18mm. WQ 250F has a float control which controls its activation depending on the level of the pumped medium and protects the pump against dry running. The pump is additionally equipped with an overcurrent protection on the power cable. The WQ submersible pumps are used to pump out treated sewage from the second chamber of a septic tank, water from flooded rooms, irrigate or pump water from reservoirs or ponds. Application area: households, agritourism, agriculture. The WQ 250F is often used in domestic sewage treatment plants
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 68
Maximum immersion depth [meters] 10 m
Working position Vertical
Material execution:
Stainless steel motor housing
Cast iron impeller
Cast iron pump cover
PLWQ-250F
Data sheet
Flow
200 l/min
Voltage
230 V
Engine power
0,25 kW
Lift height
7 m
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The WQ 1100F submersible pump for gray water, rainwater, drainage, dirty water and sewage has a wide range of applications, it can be used both in agriculture, agritourism and single-family houses, as well as in municipal enterprises or in production and technological processes. WQ 1100 is adapted to continuous operation in difficult conditions, has a float control which controls its activation...
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35 °...
Maximum capacity: 380 l/min
Maximum lifting height: 14 m
Motor power: 1.3 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
Maximum capacity: 150 l/min
Maximum lifting height: 7 m
Motor power: 0.55 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 35 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Stainless steel pump housing
PPO technopolymer impeller
Stainless steel inlet screen...
APPLICATIONS
A. Industry and service sectors
B. Technological works
A modern device designed specifically for the outlined function, incorporating a zinc-coated steel structure, double-walled, filled with thermal insulation, electrostatically painted – color RAL 7035, structure. Leveling feet, retractable power cord, L = 2.3 m long.
Patent lock. The cabinet has an intuitive electronic...
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35 °...
Maximum capacity: 250 l/min
Maximum lifting height: 8 m
Motor power: 0.55 kW
Voltage: 230V
Discharge port: 1½"/40mm
Power cable length: 9.5 m
Size of impurities max.: 25 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Stainless steel pump housing
Stainless steel impeller
Stainless steel...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Cast iron pump housing
Cast iron impeller
Stainless steel cutting system
Cast iron pump lid
Maximum capacity: 330 l/min
Maximum lifting height: 19 m
Motor power: 1.1 kW
Voltage: 230V
Discharge port: 2"/50mm
Power cable length: 5.5 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft...
Use:
Submersible pump WQ 10-10-0.75 with crusher is a pump designed for sewage, slurry, water with the presence of organic pollutants and gray water pollutants in the household. The pump has an efficient grinding system that cuts the pumped medium into small pieces, which does not clog the discharge part. The pump has a float control, which controls the start of the engine according to the...
Maximum capacity: 130 l/min
Maximum lifting height: 5 m
Motor power: 0.4 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 30 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
Maximum capacity: 750 l/min
Maximum lifting height: 15.5 m
Motor power: 1.5 kW
Voltage: 230V
discharge port: 2"
Power cable length: 9.5 m
Size of impurities max.: 8 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Stainless steel pump housing
Impeller made of impact-resistant plastic...
error Your review appreciation cannot be sent