Mini ball valve (blue butterfly handle) M-F

Gate valve with EPDM seal and ductile iron body PN 16

Reducing socket BSP thread F/M

"Rinoxdos" piston pressure reducer valve

Cast iron spigot flange Type F

Flanged PN16 metallic expansion joint

APPLICATION - Reduction of mechanical and thermal stresse and related systems : pumps, compressors, actuators. -Absorption of lateral movements (30 mm and 60 mm). reduction of vibration and noise. Fluid: fluids subjected to high temperatures and pressures such as: steam, thermal oil, hot water, chemicals etc.   GENERAL CHARACTERISTICS Range : from DN 25 to DN300 (MVT 30mm : -20/+10 mm axial)...

Stainless steel needle valve PN400

Pillar type fire hydrant Vintage design double closing

The fire hydrants are made in the form of column with internal structure to enable drawing water from pipeline and a header with saddle tees for attachment of fire hoses. In the lower part of the hydrant there is a castiron valve chamber with a poppet acting as closing element and a drainage device. The chamber housing is connected to the ball's (ball return valve) valve chamber finished with a...

Pillar / stand for actuator

Four terminal network TT

REGE check valve

1. Removable and monoblock (only up to 2”) check valve. 2. Hot-forging brass according to UNE-EN 12165. 3. Threaded female ends gas (BSP) acc/ ISO 228/1. 4. Working temperature: Air: -20 ºC to 100º C. Gas: -20 ºC to 60º C. Water: 0 ºC to 100º C. 5. Maximum working pressure 25/18/12 bar (PN-25/ PN-18/ PN-12)  6. Suitable for all kind of industrial, pneumatic and hydraulic installations. 7....

GEFLEX DN8 3/8" M - 1/2" F

Socket bend Type MMK

Tank floor check valve

Check valve offers a feed-through flow rate of 5,000 l/h (for concrete basins/tanks - 4000l/h for geomembrane basins) for a pressure loss (groundwater pressure or gas pressure needed for opening the valve) of 60 mbar (60 mm head).

Metallic expansion joint with butt welding ends

Fluids subjected to high temperatures and pressures such as: steam, thermal oil, hot water, chemicals etc. GENERAL CHARACTERISTICS - Range : from DN 25 to DN300 (MVT 30mm : -20/+10 mm axial) from DN 50 to DN 300 (MVT 60mm : -40/+20 mm axial) Expansion joint with rotating flanges PN25. Flexible metal bellow. STANDARDS Butt welding connection BW (Butt Welding) WORKING CONDITIONS Maximum...

Stainless steel suction basket, without valve AISI316L

Heavy ball valve PN40