- The housing and cover are made of 1.4301 stainless steel (AISI 304).
- NBR / EPDM valve circumferential seal according to ISO 1629
- Replaceable seal on the cover that prevents backflow.
- Detachable connections (screws, washers and nuts) that connect the elements are made of stainless steel.
- Nominal connection diameters in accordance with PN-EN ISO 6708.
- The valve designation meets the requirements of the standard: PN-EN 19
- Rotating mechanism according to standard PN-EN 10088-1
- Screws and washers made of stainless steel 1.4301
- Manufactured according to EN ISO 6708
Frequent use:
- In the transport of sewage and other inert liquids in wastewater treatment plants, pumping stations for drainage, drainage and hydraulic facilities, reclamation systems, flood protection systems.
- various industries.
16 other products in the same category:
Range: from DN100 to DN200.
-Body and plate in polyamide reinforced with 20% glass fibers.
-Low mass structure with minimum face to face -Easy and quick instauration
-Low pressure drop.
-Installation at the end of the networks on a vertical wall or a standard flange.
-Perfect seal ensured wih gasket -Optimal sealing ensured by a lip seal. Product advantage:
-Low weight for high pressure...
The materials from which the MULTI valves are made make the parts far lighter than the traditional valves as well as quick and easy to handle and install.
They are very highly resistant to corrosion, UV light, thermal shocks and mechanical stress.
The MULTI valve body is made from glass fibre reinforced isophtal acid polyester and coated in an isophtal acid Gel-Coat.
The axle is ERTACETAL...
Range: from DN50 to DN300.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard...
Range: from DN50 to DN300.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard...
Function ON/OFF or regulation. Wafer threaded mounting ISO PN10. Unidirectional tightness, direction indication thanks to the arrow on the body. Small retention zone: the gate is guided in the body and has little clearance. Gland assembly: packing and O-ring (same material as seat joint) to assure the elasticity and decrease the operating torque. Small head loss. Possibility to regulate thick...
Available in DN 100, 110, 125, 160 and 200, the valve is comprised of:
a recyclable 20% glass fibre reinforced Polyamide body (PA6-20FCV) a recyclable 30% glass-ball reinforced PPH door a TPE lip seal over-moulded on the door to guarantee a seal at a low level of back pressure an over-moulded TPE pipe sleeve seal.
Thanks to its material, the flap valve offers good resistance against corrosion...
Range: from DN50 to DN600.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard...
Function ON/OFF or regulation. Wafer threaded mounting ISO PN10. Unidirectional tightness, direction indication thanks to the arrow on the body. Small retention zone: the gate is guided in the body and has little clearance. Gland assembly: packing and O-ring (same material as seat joint) to assure the elasticity and decrease the operating force. Small head loss. Possibility to regulate thick...
GENERAL CHARACTERISTICS
Range : from DN 50 to DN 600
Function ON/OFF or regulation
Wafer threaded mounting ISO PN10
Unidirectional tightness, direction indication thanks to the arrow on the body
Small retention zone: the gate is guided in the body and has little clearance
Gland assembly: packing and O-ring (same materials as seat joint) to assure the elasticity and decrease the operating...
Most common use:
- When transporting sewage and other inert liquids in sewage treatment plants.
- Sewage pumping stations, reclamation and hydrotechnical facilities,
- Road water drainage systems, flood protection systems.
Features:
- Material:
Body: Stainless steel AISI 316
Knife: Inox AISI 316
- Sealing: 4 sides
- Seal: EPDM
- Pressure: 6 Wc
Check valve offers a feed-through flow rate of 5,000 l/h (for concrete basins/tanks - 4000l/h for geomembrane basins) for a pressure loss (groundwater pressure or gas pressure needed for opening the valve) of 60 mbar (60 mm head).
error Your review appreciation cannot be sent