1) Body made in brass according to UNE-EN 1982.
2) Lever made in Zamak.
3) Black mate finish.
4) Conventional D40 ceramic cartridge.
5) G ½” connectors.
6) Maximum temperature: 85 °C.
7) Max. recommended temp.: 65 °C.
8) Maximum pressure: 10 bar.
9) Minimum pressure: 0,5 bar.
10) Recommended pressure: 1 - 3 bar.
1) Body made in brass according to UNE-EN 1982.
2) Lever made in Zamak.
3) Chrome plated according to EN 248.
4) Guided outlet noiseless Ø40 ceramic cartridge.
5) M24x1 aerator with chrome plated brass cover.
6) Fitted with chain holder, 60 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended temp.: 65 °C.
9)...
1) Body made in brass according to UNE-EN 1982.
2) Handle made in Zamak.
3) Chrome plated according to EN 248.
4) 2-position conventional D40 ceramic cartridge.
5) Anti-lime M24x1 plastic aerator with chrome plated brass cover.
6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended...
1) Body made in stainless steel AISI 304.
2) Chrome plated according to EN 248.
3) Compatibility with all series.
4) Regulation system to install.
5) Fitted with all fixing elements.
6) Maximum temperature: 85 °C.
7) Max. recommended temp.: 65 °C.
8) Maximum pressure: 10 bar.
9) Minimum pressure: 0,5 bar.
10) Recommended pressure: 1 - 3 bar.
1) Body made in brass according to UNE-EN 1982.
2) Cartridge made in brass according to UNE-EN 12165 with POM cap.
3) Chrome plated according to EN 248
4) Timed cartridge regulated to 7-10 s (at 3 bar).
5) Antivandal M24x1 plastic aerator.
6) Fitted with brass made fixing nut and plastic filter.
7) Máximun temperature: 85 °C.
8) Max. recommended temp.: 65 °C.
9) Maximum pressure: 10 bar.
10)...
1) Body made in brass according to UNE-EN 1982.
2) Lever made in Zamak.
3) Chrome plated according to EN 248.
4) Conventional D40 ceramic cartridge.
5) Fitted with flexible hose (150 cm long) and hand-shower.
6) Flexible connection from the base to single lever mixer.
7) Anti-lime M28x1 plastic aerator with chrome plated brass cover.
8) Fitted with all fixing elements.
9) Maximum temperature:...
1) Body, spout and threaded shaft made in brass with low lead content CB756S.
2) Chrome plated according to EN 248.
3) Plastic headwork CITEC HP12SR901.
4) Fixing set with stainless steel washer and brass nut CW617N.
5) Maximum temperature: 85 °C.
6) Max. recommended temp.: 65 °C.
7) Maximum pressure: 10 bar.
8) Minimum pressure: 0,5 bar.
9) Recommended pressure: 1 - 3 bar.
error Your review appreciation cannot be sent