

1) Body, handle, base and rotary spout made in brass according to UNE-EN 1982.
2) Chrome plated according to EN 248.
3) Guided outlet noiseless Ø40 ceramic cartridge.
4) Fitted with 40 cm long flexible connectors (M10x1, G ⅜”), flexible hose, hand-shower and brass made horseshoe fixing set.
5) Minimum flow rate: 20 l/min (3 bar).
6) Maximum use temperature: 85 °C.
7) Max. recommended temp.: 65 °C.
8) Maximum use pressure: 10 bar.
9) Minimum use pressure: 0,5 bar.
10) Recommended pressure: 1 - 5 bar.
Trusted client
Trusted delivery
16 other products in the same category:
Features: 1) Body, spout and lids made of brass in accordance with UNE-EN 1982. 2) Handle made of Zamak. 3) Chrome-plated according to EN 248. 4) Noiseless ceramic cartridge Ø40. 5) M24x1 plastic aerator with anti-limescale system. Brass body, chrome plated. 6) Maximum temperature of use: 85 ° C. 7) Maximum recommended temperature: 65°C. 8) Maximum usable pressure: 10 bar. 9) Minimum...
1) Body and spout made in brass according to UNE-EN 1982. 2) Handle made in Zamak. 3) Chrome plated according to EN 248. 4) Guided outlet noiseless Ø25 ceramic cartridge. 5) Anti-lime F18x1 plastic aerator with chrome plated brass cover. 6) Fitted with 40 cm long flexible connectors M10x1 F ⅜” and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65...
1) Body made in brass according to UNE-EN 1982. 2) Lever made in Zamak. 3) Black mate finish. 4) 2 position D35 ceramic cartridge. 5) Anti-lime M18x1 plastic aerator with black mate brass cover. 6) Fitted with chain holder, 55 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65 °C. 9) Maximum pressure: 10...
1) Body made in brass according to UNE-EN 1982. 2) Lever made in Zamak. 3) Chrome plated according to EN 248. 4) Guided outlet noiseless Ø40 ceramic cartridge. 5) M24x1 aerator with chrome plated brass cover. 6) Fitted with chain holder, 60 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65 °C. 9)...
COMPONENTS AND MATERIALS - Rear wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. The product incorporates two units of this hanger. Each hanger has an internal thread that allows its installation by coupling to a threaded cylinder fixed to the wall through each of...
1) Bottle made in brass according to UNE-EN 12165. 2) Arm made in brass according to UNE-EN 12165. 3) Cover made in brass according to UNE-EN 12165. 4) Telescopic tube made in brass according to UNE-EN 12165. 5) Nuts made in brass according to UNE-EN 12165. 6) Chroming plate according to EN 248.
Opening time adjustable with the key supplied from 0 to about 50 seconds, with automatic device flow rate for a constant supply of 9 liters / minute from 0.5 to 9 bar. Brass cartridge with stainless steel pin and filters and with blue and red marker. Supplied with protection for masonry works - handle in chromed ABS with brass core - built-in flow balancer
1) Body made in brass according to UNE-EN 1982. 2) Lever made in Zamak. 3) Black mate finish. 4) 2 position D35 ceramic cartridge. 5) Anti-lime M18x1 plastic aerator with black mate brass cover. 6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65 °C. 9) Maximum pressure: 10...
Photocell mixer in polished and chromed cast brass – with measurements also suitable for installation on a marble top with a built-in sink and on a large-sized sink – built-in solenoid valve and battery that are easy to replace – stop flooding function after 60 seconds of continuous delivery – anti-legionella function, dispensing for 45 seconds after 24 hours of non-use – power supply with...
error Your review appreciation cannot be sent