

The product consists of a wall mount, a wall plate covering the wall mount and the paper holder. The lid of the paper holder is manufactured in injected zinc with a circularhole in its top where a bar that fixes the lid to the paper holder goes through. The wall plate covering the wall mount is made of injected zinc and has a diameter of 56.5 mm and a thickness of 1.5 mm. The wall mount, made of carbon steel, has two holes so it can be fixed to the wall by means of screws. The assembled set has a chrome plated finish with 3.5-6 μm nickel + 2-3 μm chromium that provides an appropriate resistance against corrosion. The total measures of the product are 101,8x128x91,2 mm.
Trusted client
Trusted delivery
16 other products in the same category:
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. This piece consists of the main bar holding the paper roll and the round snap flange hiding and fixing the rear plate....
COMPONENTS AND MATERIALS - Rear wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. The product incorporates two units of this hanger. Each hanger has an internal thread that allows its installation by coupling to a threaded cylinder fixed to the wall through each of...
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. - Translucent round soap dish. - Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen key. OPERATION...
COMPONENTS AND MATERIALS - Concealed wall plates (2 units) – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plates with two stainless steel screws. - Fixings set - Four Ø 6mm wall plugs, four Ø 4mm screws and one allen key. OPERATION Suitable for hotel or...
COMPONENTS AND MATERIALS AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. - Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen key. OPERATION Suitable for hotel or residential bathrooms. No specific...
Features: 1) Body, handle and covers made of brass according to UNE-EN 1982. 2) Chrome-plated according to EN 248. 3) Silent ceramic cartridge Ø35 insert. 4) Nozzle M18x1 made of brass, chrome. 5) Maximum temperature of use: 85 ° C. 6) Maximum recommended temperature: 65°C. 7) Maximum operating pressure: 10 bar. 8) Minimum operating pressure: 0.5 bar. 9) Recommended pressure: 1 - 5 bar.
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, matt black powder coat (RAL 9004). Secured to wall plate with one Allen stainless steel screw. The product incorporates the open ring for towels and the rear round anchor cover for installation. - Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws...
COMPONENTS AND MATERIALS - Concealed wall plates (2 units) – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plates with two stainless steel screws. - Translucent round glass made of glass - Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen...
error Your review appreciation cannot be sent