The drain pipe is designed to transfer the pumped medium. It is often used to pump or transport clean water, dirty water, sanitary sewage and other liquids contaminated with organic waste. It is excellent for use as an accessory for submersible pumps, sewage pumps.
Multistage submersible pump designed for pumping fresh, clean, cold water from vertebral wells and large-size tanks. The design of the pump allows it to be connected directly to the water system, bypassing the diaphragm tank and pressure switch, which significantly reduces installation costs. The operation of the MULTI DIVER 1200 EVO is controlled automatically by means of a built-in electronic...
Maximum capacity: 100 l/min
Maximum lifting height: 6 m
Motor power: 0.26 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 5 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen...
A sewer cleaner is used to clean sewage of sludge and other settled dirt. A high-pressure water jet breaks up the settled layers in the sewage. The pressure force is obtained from a water source via a pipe with a diameter of 25 or 52 mm.
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Aluminum housing
Technopolymer impeller
Stainless steel inlet screen
Stainless steel pump cover
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor housing
Maximum capacity: 140 l/min
Maximum lifting height: 7 m
Motor power: 0.4 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Stainless steel pump housing
PPO technopolymer impeller
Stainless steel inlet screen...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Winding insulation class B
Number of starts maximum [x/hour] 20
Minimum motor cooling flow [m/s] 0.08
Maximum immersion depth [meters] 50
Working position vertical
Built-in engine starting method
capacitor
material version:
Stainless steel pump housing
Cable sheath stainless steel
Pump shaft stainless steel
Noryl...
Maximum capacity: 130 l/min
Maximum lifting height: 8 m
Motor power: 0.35 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
Maximum capacity: 92 l/min
Maximum lifting height:40 m
Motor power: 1 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Stainless steel pump housing
Technopolymer impellers
Plastic inlet screen
Plastic pump lid
The device for drying clothes is also useful in sports centers, recreational centers and resorts and ski centers. It serves as a drying agent for jerseys, sportswear and footwear, as well as body armor, thus extending their lifespan and reducing the formation of odors and bacteria.
The dryer is characterized by its versatility, high quality, innovative solution safety, adaptability,...
Maximum capacity: 530 l/min
Maximum lifting height: 21 m
Motor power: 1.8 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
ADVANTAGES OF DRYING IN OUR DRYER:
- Nuts can be dried regardless of weather conditions.
- Nuts that are dried in a dryer are dried more evenly, which reduces yield losses as well as income.
- Nuts that are dried in a drying room are of better quality than those that are dried outdoors with the help of sunlight.
DIMENSIONS:
- L/W/H = 1596 mm x 1139 mm x 2884 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Cast iron pump housing
Cast iron impellers
Stainless steel inlet screen
Cast iron pump lid
The dryer is the result of many years of development and testing. It is developed and manufactured in Slovenia, Europe. It is made of quality stainless materials that guarantee a long service life. The dryer is equipped with automation that regulates and controls the drying of walnuts, hazelnuts, and fruit. Automation adjusts the operation of the dryer based on external factors and the fruits...
The drain pipe is designed to transfer the pumped medium. It is often used to pump or transport clean water, dirty water, sanitary sewage and other liquids contaminated with organic waste. It is excellent for use as an accessory for submersible pumps, sewage pumps.
error Your review appreciation cannot be sent