Flexible yet robust garden water hose made of PVC with polyester cross braiding. Versatile in use, this hose is useful for pumping, watering, drainage, and irrigation.
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35 °...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 25
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor chamber housing
Maximum capacity: 100 l/min
Maximum lifting height: 6 m
Motor power: 0.26 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 5 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen...
Maximum capacity: 380 l/min
Maximum lifting height: 13 m
Motor power: 1.3 kW
Voltage: 230V
Discharge port: 2"/50mm
Power cable length: 5.5 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 8
Working position vertical
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless...
The pumps are monoblock submersible pumps where the pump hydraulics are integrated directly with the motor. Depending on the hydraulic parameters, they are available as single-stage or multi-stage with peripheral rotors. Their characteristic feature is that they achieve a relatively high head (pressure). The motor's winding is cooled from the inside with ecological oil.
Technical data:...
Maximum capacity: 530 l/min
Maximum lifting height: 21 m
Motor power: 1.8 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
Maximum capacity: 140 l/min
Maximum lifting height: 7 m
Motor power: 0.4 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Stainless steel pump housing
PPO technopolymer impeller
Stainless steel inlet screen...
Submersible pumps are aggregates made entirely of stainless steel, installed in wells with a minimum diameter of 110mm. They are designed for pumping clean, cold water that does not contain solid grinding or long-fiber elements.
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 68
Winding insulation class B
Number of starts up to [x / hour] 20
Minimum cooling flow of the...
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35 °...
Maximum capacity: 92 l/min
Maximum lifting height: 30 m
Motor power: 0.8 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Stainless steel pump housing
Technopolymer impellers
Plastic inlet screen
Plastic pump lid
Maximum capacity: 260 l/min
Maximum lifting height: 10 m
Motor power: 0.55 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
Maximum capacity: 250 l/min
Maximum lifting height: 8 m
Motor power: 0.55 kW
Voltage: 230V
Discharge port: 1½"/40mm
Power cable length: 9.5 m
Size of impurities max.: 25 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Stainless steel pump housing
Stainless steel impeller
Stainless steel...
The WQ 1500 submersible pump for gray water, rainwater, drainage, dirty water and sewage has a wide range of applications, it can be used both in agriculture, agritourism and single-family houses, as well as in municipal enterprises or in production and technological processes. WQ 1500 is adapted to continuous operation in difficult conditions, has a float control which controls its activation...
Maximum capacity: 750 l/min
Maximum lifting height: 15.5 m
Motor power: 1.5 kW
Voltage: 230V
discharge port: 2"
Power cable length: 9.5 m
Size of impurities max.: 8 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Stainless steel pump housing
Impeller made of impact-resistant plastic...
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor chamber housing
Flexible yet robust garden water hose made of PVC with polyester cross braiding. Versatile in use, this hose is useful for pumping, watering, drainage, and irrigation.
error Your review appreciation cannot be sent