Rubber expansion - joint EPDM, DN200, L 130 mm, PN10
€187.90
Tax included
Trusted client
Trusted delivery
PLDI7242NL130-0200
No customer reviews for the moment.
16 other products in the same category:
Pillar type fire hydrant with stainless steel standpipe
Product description (standard execution): • Complete drainage after cut - off the flow • Kv factor > 80m³/h - ( for 1x75); Kv factor > 140m³/h - ( for 2x75); Kv factor > 160m³/h - ( for 1x110); • Dehydration time < 15 min. • Water-traces < 100 ml (for DN80); < 150 ml (for DN100) • Rotation head 0˚ to 360˚ • Stainless steel stem with rolled thread • O-ring stem sealing,...
Ductile iron pipes
Advantages of Ductile Iron Pipes - Inherent resistance of ductile iron adainst corrosionalong with improvement of this resistance via various coatings - Appropriate resistance againts pressures such as water hammer and external pressure like traffic loads and etc. -Suitable for use in loose ground with high level of subterranean water - Resistance against electrical currents due to use of...
Vertical level switch 5m
Use: The device, connected to a pump, allows one to control the liquid level. Tension utlized: 250Vca max Microswitch features: 20(8)A Maximum operational temperature: 0 - 50°C Microswitch head Protection grade: IP68 Continuous Service Max. pressure working: 0,5 bar Differential: Min 50 mm – Max 150 mm Vertical position Installation
€59.90
Tax included
Ball valve (blue handle)
1. Ball valve with full bore. 2. Brass construction acc./ to UNE-EN 12165 chrome plated. 3. Threaded male-female ends gas (BSP) according to ISO 228/1. 4. Working by means of steel lever handle. 5. Working temperature from -20ºC to 110ºC. 6. Maximum working pressure 25 bar (PN 25). 7. PTFE Seats.
€4.76
Tax included
- New
Air release valve single orifice DN50 PN16
Application Air release valve intended for use at water lines - for air release and aeration of the pipelines. Working conditions: temp. up +70°C
€126.90
Tax included
error Your review appreciation cannot be sent