BACKFLOW PREVENTER MALE TYPE BA CONTROLABLE REDUCED PRESSURE

Socket bend Type MMK

Flanged bend Type FFK

GEFLEX DN8 3/8" F - 3/8" F

Metallic expansion joint with butt welding ends

Fluids subjected to high temperatures and pressures such as: steam, thermal oil, hot water, chemicals etc. GENERAL CHARACTERISTICS - Range : from DN 25 to DN300 (MVT 30mm : -20/+10 mm axial) from DN 50 to DN 300 (MVT 60mm : -40/+20 mm axial) Expansion joint with rotating flanges PN25. Flexible metal bellow. STANDARDS Butt welding connection BW (Butt Welding) WORKING CONDITIONS Maximum...

Double flanged spigot Type FF

Straight male connector with flanges, PL0017F

Pressure relief valve with conveyed discharge

1. Brass construction (see material list) 2. Maximum working pressure:  16 bar (PN 16) from 3/8" to 2" and 4"  10 bar (PN 10) 2.1/2" and 3" 3. Pressure regulation range (Pnr) with standard spring:  0 - 10 bar (sizes from 3/8" to 3")  5 - 10 bar (size of 4") 4. Overpressure: 10% of Pnr 5. Reclosing value: 20% of Pnr 6. Threaded gas (BSP) F-F acc/ to ISO 228/1 7. Shell strength test: Test P10-EN...

Flanged PN16 metallic expansion joint

APPLICATION - Reduction of mechanical and thermal stresse and related systems : pumps, compressors, actuators. -Absorption of lateral movements (30 mm and 60 mm). reduction of vibration and noise. Fluid: fluids subjected to high temperatures and pressures such as: steam, thermal oil, hot water, chemicals etc.   GENERAL CHARACTERISTICS Range : from DN 25 to DN300 (MVT 30mm : -20/+10 mm axial)...

Connection for garden hose, faucet 3/4"

“T” female connector, PL0037

Krogelni ventil medenina (MS) z metuljčkom, PN25

Air release valve single orifice DN50 PN16

Application Air release valve intended for use at water lines - for air release and aeration of the pipelines. Working conditions: temp. up +70°C

Enodelni inox reducirni ventil

FLANGED TYPE "Y" STRAINER PN16 WITH MAGNETIC COLLECTOR

APPLICATION Heating system and undrinkable domestic water, steam and other compatible fluids. GENERAL CHARACTERISTICS Filter equipped with a magnetic shaft for sensing the metal particules contained in the fluid. "Y" body and bonnet in cast iron from DN15 to DN300 and in ductile iron for DN350 and DN450. Epoxy coating RAL 5019 with thickness 80-100µm. Dismountable stainless steel screen. Drain...

Brass valve with type “Y” strainer filter

Flange and double-socket tee connector MMA