The hands‐in hand dryer consists of a compact body of 3 mm ABS that is mounted against the wall on a carbon steel frame. The frame is fixed to the wall using 5 holes with the dimensions for an 8 mm drill bit.
Additionally a security screw is fixed behind the water tank. The dryer is operated by an electronic infra‐red sensor and it automatically stops after the hands have been withdrawn from the sensor field or after 18 seconds (vandal‐proof disconnection). The air is blown out through a linear matrix of holes for ideal distribution of the air and drying by dragging the water off the hands. Air temperature is controlled automatically. The dryer works with a brushless motor, 220‐240V, 35.000 r.p.m. Air speed is 396 km/h which allows drying hands in approximately 10s. The dryer has a total power rating of 1400W with a máximum consumption of 8A. A switch located in one side of the hand dryer offers the possibility of turning off the heating element in order to reduce consumption. HEPA H 13 filter is included in order to remove 99,95% of particles with a minimum size of 0,3µm. Sound level at a distance of 2m is of 76 dB. Total measures of the hand dryer are 680x300x250 mm, with a total weight of 8,5 kg.
PL01 15 01 00
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
COMPONENTS & MATERIALS
- Cover – 2mm white steel or 2mm AISI 304 stainless steel covers. Cover designed for heavy duty areas equipped with zamak 360º swivel nozzle. Nozzle is equipped with vandal-resistant grille. Cover is secured to mounting base with two tamper proof screws.
- Mounting base – 1.5mm aluminium with four Ø 6mm mounting holes. Equipped with four silent blocks to diminish hand...
The Hands-in hand dryer hand dryer consists of a compact body of 1 mm thick AISI 304 stainless steel that is mounted against the wall on a carbon steel frame. The frame is fixed to the wall using 5 holes with the dimensions for an 8 mm drill bit. The dryer is operated by an electronic infra-red sensor and it automatically stops after the hands have been withdrawn from the sensor field or after...
COMPOSITION
- Self-closing wall mounted push button tap for shower
- Shower head
- Wall pipe fixing kit
- Chromed brass connecting pipe
- Kit tube and shower
OPERATING CHARACTERISTICS
Flow rate: 8 l/min (w/flow regulator)
Operating pressure: Min 1 – max 6 bar
Recommended pressure: 2 – 4 bar
Water inlet temperature: 5 – 65 °C
Flow time: 15 sec. @ 3 bar (tolerance as stated in EN 816: 15 ±...
Pistol-type hot air hair dryer with wall mount. Both the mount and the hair dryer are made in white ABS plastic. The mount is fixed to the wall with two screws, for which two holes need to be drilled in the wall using a 6 mm drill bit. On the front of the hair dryer mount, there is a main switch with an indicator light. On the back of the pistol‐type handle, there is a switch with two...
The hot air hand dryer consists of a one-piece casing in 2,5 mm polished chrome aluminium. The base-casing assembly which makes up the hand dryer is fixed to the wall by means of 4 holes with the dimensions for an 8 mm drill bit. The dryer is operated by an electronic infra-red sensor and it automatically stops after the hands have been withdrawn from the sensor field. The universal brushless...
error Your review appreciation cannot be sent