Submersible pump for clean water 230V 1.1kW 270l/min, high pressure
€312.90
Tax included
Cast iron pumps Multistage submersible pumps with high head. The model is a response to customer demand for robust cast iron submersible watering pumps that generate high pressure. The pumps are designed for pumping clean, cold, fresh water.
Submersible pumps are aggregates made entirely of stainless steel, installed in wells with a minimum diameter of 110mm. They are designed for pumping clean, cold water that does not contain solid grinding or long-fiber elements.
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 68
Winding insulation class B
Number of starts up to [x / hour] 20
Minimum cooling flow of the...
Maximum capacity: 450 l/min
Maximum lifting height: 22 m
Motor power: 1.5 kW
Voltage: 400V
Discharge port: 2"/50mm
Power cable length: 8 m
Size of impurities max.: 8.5 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 25
Working position vertical
material version:
Cast iron pump housing
Impeller high chrome steel
Stainless steel...
Suction baskets are the beginning of the suction pipe and allow water to be sucked in by the water pump. The end of the pipe must be connected to a non-return valve, which allows the basket to be emptied after use.
The suction basket is most often used to pump clean and dirty water from open reservoirs such as lakes, deep ponds or rivers.
Due to its design, it prevents contaminants from...
Maximum capacity: 380 l/min
Maximum lifting height: 10 m
Motor power: 1.1 kW
Voltage: 230V
Discharge port: 2"/65mm
Power cable length: 9.5 m
Size of impurities max.: 25 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Cast iron housing
Cast iron impeller
Cast iron inlet screen
Cast iron...
APPLICATION:
The WQ 450F pump is a compact submersible pump designed for pumping dirty, rainy and gray water containing organic pollutants with a maximum diameter not exceeding 25mm. The WQ 450F has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running. The pump is additionally equipped with an overcurrent protection...
Maximum capacity: 330 l/min
Maximum lifting height: 9 m
Motor power: 1.1 kW
Voltage: 230V
discharge port: 2"
Power cable length: 6 m
Size of impurities max.: 15 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Insulation class B
Working position vertical
material version:
Cast iron pump housing
Cast iron impeller
Stainless steel inlet screen
Cast iron pump lid
The submersible pump with a grinder is dedicated to pumping sewage, slurry and dirty water with the presence of organic and household contaminants. The pump has an efficient grinding system which initially cuts the pumped medium into pieces, thanks to which there is no clogging of the discharge section in the pipeline. The pump has a float control which controls switching on depending on the...
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor chamber housing
The WQ 2200 submersible pump for gray water, rainwater, drainage, dirty water and sewage has a wide range of applications, it can be used both in agriculture, agritourism and single-family houses, as well as municipal enterprises or in production and technological processes. WQ 2200 is adapted to continuous operation in difficult conditions, has a float control which controls its activation...
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35...
• Working with high-pressure media
• Robust design - high thermal and mechanical resistance
• Lightweight flexible
• Flat - at rest
• Excellent gliding properties - less resistance when working on bends
External enclosure PVC
Inner casing PU - soft PVC
Reinforcement polyester
Temperature of the medium -10C ÷ 50C
Bursting pressure 10 bar
A discharge hose that can be rolled up significantly...
Maximum capacity: 750 l/min
Maximum lifting height: 15.5 m
Motor power: 1.5 kW
Voltage: 230V
discharge port: 2"
Power cable length: 9.5 m
Size of impurities max.: 8 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Stainless steel pump housing
Impeller made of impact-resistant plastic...
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Cast iron pump housing
Cast iron impellers
Stainless steel inlet screen
Cast iron pump lid
Cast iron pumps Multistage submersible pumps with high head. The model is a response to customer demand for robust cast iron submersible watering pumps that generate high pressure. The pumps are designed for pumping clean, cold, fresh water.
error Your review appreciation cannot be sent