Submersible pump for clean water 230V 0,75kW 230l/min
€171.90
Tax included
A submersible pump designed to pump clean, cold water and gray water containing organic impurities with a maximum diameter of 25mm from flooded rooms, basements, wells or from swimming pools and tanks. Instead of traditional float control, it has a built-in float, which allows it to be used in narrow wells or revisions. The operation of the pump is controlled by a slider on the body which sets the activation level. In the auto pump mode, it starts when the liquid level reaches the height marked with the slider and turns off when the liquid level reaches 11 cm from the base of the pump. In MANUAL mode, the pump works continuously until the level of the pumped liquid reaches 5 cm from the base of the device.
Multistage surface pumps are designed for supplying water to residential buildings, increasing pressure in installations. Due to high hydraulic parameters, they are also successfully used in farms, industrial plants, irrigation systems, home gardens or in allotment gardens.
Technical data:
Maximum water temperature 35°C
Degree of protection IP 44
material version:
Pump shaft stainless steel...
• Working with medium under pressure
• Robust workmanship
• Resistant to abrasion and UV radiation
• Light weight
• Flat - at rest
• Large selection of sizes
Temperature of the medium 0°C ÷ 60°C
Bursting pressure 6 bar
Working pressure 4 bar
External enclosure PE
Inner casing PE
Reinforcement polyester
A discharge hose that can be rolled up significantly reduces the hydraulic performance of the...
• Working with high-pressure media
• Robust design - high thermal and mechanical resistance
• Lightweight flexible
• Flat - at rest
• Excellent gliding properties - less resistance when working on bends
External enclosure PVC
Inner casing PU - soft PVC
Reinforcement polyester
Temperature of the medium -10C ÷ 50C
Bursting pressure 10 bar
A discharge hose that can be rolled up significantly...
Maximum capacity: 315 l/min
Maximum lifting height: 11 m
Motor power: 0.75 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 25
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor chamber housing
• Working with high-pressure media
• Robust design - high thermal and mechanical resistance
• Lightweight flexible
• Flat - at rest
• Excellent gliding properties - less resistance when working on bends
External enclosure PVC
Inner casing PU - soft PVC
Reinforcement polyester
Temperature of the medium -10C ÷ 50C
Bursting pressure 10 bar
A discharge hose that can be rolled up significantly...
Technical data:
Size of filtered impurities > 120
Maximum working pressure 10 Bar
Connection size 1"
Maximum flow 120 l/min
Material version:
Plastic housing
Stainless steel mesh
Plastic discs
The pumps are used to supply single-family houses, summer houses, gardening, enterprises, workshops, etc. with clean, cold water from your own intake. The pump has the ability to suck water from a depth not exceeding 8 m.
The pump has the ability to suck water from a depth not exceeding 8 m
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 44
Material execution:...
• Working with medium under pressure
• Robust workmanship
• Resistant to abrasion and UV radiation
• Light weight
• Flat - at rest
• Large selection of sizes
Temperature of the medium 0°C ÷ 60°C
Bursting pressure 6 bar
Working pressure 4 bar
External enclosure PE
Inner casing PE
Reinforcement polyester
A discharge hose that can be rolled up significantly reduces the hydraulic performance of the...
Maximum capacity: 450 l/min
Maximum lifting height: 26 m
Motor power: 2.2 kW
Voltage: 400V
Discharge port: 2"/50mm
Power cable length: 8 m
Size of impurities max.: 8.5 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 25
Working position vertical
material version:
Cast iron pump housing
Impeller high chrome steel
Stainless steel...
Use:
Submersible pump WQ 10-10-0.75 with crusher is a pump designed for sewage, slurry, water with the presence of organic pollutants and gray water pollutants in the household. The pump has an efficient grinding system that cuts the pumped medium into small pieces, which does not clog the discharge part. The pump has a float control, which controls the start of the engine according to the...
Maximum capacity: 130 l/min
Maximum lifting height: 8 m
Motor power: 0.35 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
Maximum capacity: 170 l/min
Maximum lifting height: 7 m
Motor power: 0.55 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic suction screen
Plastic pump cover
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Winding insulation class B
Number of starts maximum [x/hour] 20
Minimum motor cooling flow [m/s] 0.08
Maximum immersion depth [meters] 50
Working position vertical
Built-in engine starting method
capacitor
material version:
Stainless steel pump housing
Cable sheath stainless steel
Pump shaft stainless steel
Noryl...
A submersible pump designed to pump clean, cold water and gray water containing organic impurities with a maximum diameter of 25mm from flooded rooms, basements, wells or from swimming pools and tanks. Instead of traditional float control, it has a built-in float, which allows it to be used in narrow wells or revisions. The operation of the pump is controlled by a slider on the body which sets the activation level. In the auto pump mode, it starts when the liquid level reaches the height marked with the slider and turns off when the liquid level reaches 11 cm from the base of the pump. In MANUAL mode, the pump works continuously until the level of the pumped liquid reaches 5 cm from the base of the device.
error Your review appreciation cannot be sent