The pump is a robust submersible pump designed to pump clean, cold water, as well as rainwater and gray water containing organic impurities with a maximum diameter not exceeding 5mm. It has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running. The device is additionally equipped with an overcurrent protection that protects the pump motor against overload in the event of blocking the rotor with solid elements, e.g. a stick or a stone. Submersible pumps are used for pumping water from flooded rooms, irrigation or pumping water from reservoirs or ponds. Area of application: agritourism, agriculture, industry, recreation.
Deep well pumps are designed to draw clean, cold water from drilled deep water intakes, vertebral wells and other water reservoirs. Designed for installation in wells with a minimum diameter of 110mm. The pump should not pump water with solid grinding parts, however, the design of the pumps allows for pumping water with sand content up to 5% max.
Technical data:
Maximum water temperature 35 °...
The device for drying clothes is also useful in sports centers, recreational centers and resorts and ski centers. It serves as a drying agent for jerseys, sportswear and footwear, as well as body armor, thus extending their lifespan and reducing the formation of odors and bacteria.
The dryer is characterized by its versatility, high quality, innovative solution safety, adaptability,...
The pumps are monoblock submersible pumps where the pump hydraulics are integrated directly with the motor. Depending on the hydraulic parameters, they are available as single-stage or multi-stage with peripheral rotors. Their characteristic feature is that they achieve a relatively high head (pressure). The motor's winding is cooled from the inside with ecological oil.
Technical data:...
Maximum capacity: 130 l/min
Maximum lifting height: 5 m
Motor power: 0.4 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 30 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
Maximum capacity: 100 l/min
Maximum lifting height: 6.5 m
Motor power: 0.25 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 5 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
The dryer is equipped with automation, which regulates and controls the drying of fruits, vegetables, herbs, pasta, laboratory samples, etc... The automation adjusts the operation of the dryer based on external factors and the fruits and products being dried. Due to complete automation, the drying device is very economical and fast. The automatic dryer protects the fruit from overheating, which...
• Working with high-pressure media
• Robust design - high thermal and mechanical resistance
• Lightweight flexible
• Flat - at rest
• Excellent gliding properties - less resistance when working on bends
External enclosure PVC
Inner casing PU - soft PVC
Reinforcement polyester
Temperature of the medium -10C ÷ 50C
Bursting pressure 10 bar
A discharge hose that can be rolled up significantly...
APPLICATION:
The WQ 450F pump is a compact submersible pump designed for pumping dirty, rainy and gray water containing organic pollutants with a maximum diameter not exceeding 25mm. The WQ 450F has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running. The pump is additionally equipped with an overcurrent protection...
Maximum capacity: 330 l/min
Maximum lifting height: 9 m
Motor power: 1.1 kW
Voltage: 230V
Discharge port: 2"/65mm
Power cable length: 9.5 m
Size of impurities max.: 25 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Motor housing stainless steel
Cast iron impeller
Cast iron rotor...
Technical data:
Maximum water temperature 30°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Cast iron pump housing
Cast iron impeller
Stainless steel cutting system
Cast iron pump lid
Maximum capacity: 315 l/min
Maximum lifting height: 11 m
Motor power: 0.75 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
Maximum capacity: 160 l/min
Maximum lifting height: 6 m
Motor power: 0.55 kW
Voltage: 230V
discharge port: 1"
Power cable length: 6 m
Size of impurities max.: 35 mm
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Working position vertical
material version:
Plastic pump housing
PPO technopolymer impeller
Plastic inlet screen
Plastic pump cover
Maximum capacity: 400 l/min
Maximum lifting height: 16 m
Motor power: 1.8 kW
Voltage: 230V
discharge port: 2"
Power cable length: 5.5 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 25
Working position vertical
material version:
Stainless steel pump housing
Cast iron impellers
Stainless steel shredding system
Pump shaft stainless steel
• Working with medium under pressure
• Robust workmanship
• Resistant to abrasion and UV radiation
• Light weight
• Flat - at rest
• Large selection of sizes
Temperature of the medium 0°C ÷ 60°C
Bursting pressure 6 bar
Working pressure 4 bar
External enclosure PE
Inner casing PE
Reinforcement polyester
A discharge hose that can be rolled up significantly reduces the hydraulic performance of the...
The pump is a robust submersible pump designed to pump clean, cold water, as well as rainwater and gray water containing organic impurities with a maximum diameter not exceeding 5mm. It has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running. The device is additionally equipped with an overcurrent protection that protects the pump motor against overload in the event of blocking the rotor with solid elements, e.g. a stick or a stone. Submersible pumps are used for pumping water from flooded rooms, irrigation or pumping water from reservoirs or ponds. Area of application: agritourism, agriculture, industry, recreation.
error Your review appreciation cannot be sent