Check valve with filter
€4.04
PN 10. Body brass UNE-EN 12165. Gas threaded ends ISO 228/1 - F. Max. temp. 90ºC. Vulvanized NBR sealing. Stainless steel spring and sleve AISI 304. Minimum working pressure 20 - 60 mbar.
Trusted client
Trusted delivery
1. Check valve.
2. Brass construction acc/ UNE-EN 12165.
3. Thread ends gas (BSP) female acc/ ISO 228/1.
4. Working temperature from -20ºC to 100ºC.
5. Suitable for domestic water services, heating and air-conditioning plants and compressed air systems.
6. It can be fitted in horizontal, vertical or oblique position.
7. With inlet strainer.
8. NBR sealing (rubber) 65 shore.
9. Stainless Steel spring AISI 302.
10. Maximum working pressure 12/10/6 bar (PN-12/
PN-10/ PN-6)
PL314200
No customer reviews for the moment.
16 other products in the same category:
Pressure regulator for the water system, Redux-GE...
1. Maximum working pressure 25 bar (PN-25). 2. Body in brass, nickel plated finished: CW617N acc/ EN12165 for 1/2" to 2" and CB753S acc/ EN1982 for 2 1/2", 3" and 4". 3. Other components: See table 4. Adjustable range: 1 to 5,5 bar (1/2" to 2") and 1,5 to 7 bar (2 1/2" to 4"). 5. Outlet setting pressure 3 bar. 6. Working temperature from 0ºC to 130ºC. 7. Compatible for water, 50% glycol...
€25.00
Dismantling joint PN25
WORKING CONDITIONS Maximum working pressure: 25 bar Maximum working temperature: +4°C / +110°C Epoxy coating RAL 5015 250 microns thickness - WRAS
Garden bibcock quick connector chrome handle with...
Guaranteed for the use of cold and hot water80ºC Maximum Pressure: 8 bar20ºC Maximum Pressure: 16 barMinimum Temperature -10ºCNominal Pressure: PN 16 bar (200PSI)Threads according to ISO 228/1 (DIN259)Quick closing on both handles (1/4 turn)Packing gland in the stem Body and bonnet in nickel-plated brass (UNE EN 12165)
€10.57
Multi / joint® coupling, coupling for connecting...
Product description (standard version): • Protection against pulling out of A4 stainless steel pipe • Acceptable axial deviation up to ± 8 ° • Applies to all types of bare pipes • Elastomeric seal allows easy installation • Ductile iron body and flange EN-GJS 450-10 • Stainless steel screws and nuts • Plastic protective caps on the ends of the screws • Installation in any position •...
PN 10. Body brass UNE-EN 12165. Gas threaded ends ISO 228/1 - F. Max. temp. 90ºC. Vulvanized NBR sealing. Stainless steel spring and sleve AISI 304. Minimum working pressure 20 - 60 mbar.
error Your review appreciation cannot be sent