The eyewash can be easily mounted on all the spouts with thread 22x1 M and 24x1 F (adapter supplied). It can also be used as a normal spout. Flow balancer for a constant water supply
Wall mounted Emergency eyes-washing. The product composes of a wall support, a bowl and two spigots. The bowl and the spigots are located on the top of the stainless steel wall support. The support of the spigots is inside the AISI 304 stainless steel bowl. The spigots and their support are made of chromed brass tube. The water supply must ensure a minimum flow of eyes-washing of 6l/min at a...
ClassicLine rod operated safety shower valve, wall mounted, exposed pipework
- ball valve with pull rod actuation on wall flange of stainless steel, can be mounted either on the right or left side of the door, DIN-DVGW tested and certificated, water inlet ¾” female
- flow rate at least 60 l/min at 1 bar flow pressure
- pull rod with ring handle made of steel, chemical resistant powder coated,...
PremiumLine safety shower valve with draining, wall mounted, exposed pipework
- ball valve with lever actuation on wall flange of stainless steel, DIN-DVGW tested and certificated, water inlet ¾” female
- flow rate at least 60 l/min at 1 bar flow pressure
- opening angle 90°, not self-closing
- lever made of stainless steel, polished, length 160 mm
- robust handle of plastics, black, diameter...
PremiumLine safety shower combination, with safety eye shower with stainless steel bowl, wall mounted, exposed pipework
- including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
- wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- connection piece ¾” of stainless steel, for easy installation and...
ClassicLine safety eye shower with two spray heads 45°, wall mounted, exposed pipework
- wall flange with 4 mounting holes made of stainless steel, chemical resistant green powder coated, water inlet ¾” female
- connection pipe of stainless steel for easy installation and alignment of the shower, chemical resistant green powder coated
- ball valve ½” of stainless steel, with PUSH-lever...
PremiumLine rod operated safety shower valve, wall mounted, exposed pipework - ball valve with pull rod actuation on wall flange of stainless steel, can be mounted either on the right or left side of the door, DIN-DVGW tested and certificated, water inlet ¾” female
- flow rate at least 60 l/min at 1 bar flow pressure
- pull rod with ring handle made of stainless steel, polished, length 700 mm...
PremiumLine safety shower arm, ceiling mounted
- ceiling shower arm ¾“ made of stainless steel, polished, headroom 560 mm, water inlet ¾” male
- push-on rosette of polyamide to cover the installation
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- high-performance shower head of...
ClassicLine body safety shower, floor mounted
- including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
- base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
- stand pipe 1 ¼” of stainless steel three-part, chemical resistant green powder coated, with top and bottom water...
PremiumLine safety shower arm, wall mounted, exposed pipework
- wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- wall shower arm ¾“ made of stainless steel, polished, projection 525 mm
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
-...
PremiumLine safety eye shower with two spray heads 45°, wall mounted, exposed pipework
- wall flange with 4 mounting holes made of stainless steel, polished, water inlet ¾” female
- connection pipe of stainless steel for easy installation and alignment of the shower, polished
- ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
- big push plate made of...
PremiumLine body safety shower, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
- pull rod with ring handle of steel, polished, length 700 mm
- ceiling shower arm ¾“ of stainless steel, polished, headroom 245 mm
-...
ClassicLine body safety shower, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
- ball valve ¾” of brass, with pull rod actuation, DIN-DVGW tested and certificated
- pull rod with ring handle of steel, chemical resistant green powder coated, length 700 mm
- ceiling shower arm ¾“ of...
PremiumLine body safety shower with pull rod diversion, above door installation, exposed pipework
- wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- connection pipe ¾“ of stainless steel, polished, length 75 mm
- ball valve of stainless steel, DIN-DVGW tested and certificated, with pull rod angle-diversion and wall bracket, can be mounted either on the...
PremiumLine variable body safety shower, for installation in suspended ceilings
- connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure, water inlet ¾” female
- ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and...
PremiumLine rod operated safety shower valve, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
- flow rate at least 60 l/min at 1 bar flow pressure
- opening angle 90°, not self-closing
- pull rod of stainless steel, length...
PremiumLine safety eye shower with stainless steel bowl, floor mounted
- base plate with 4 mounting holes of stainless steel, polished, dimensions 200 x 200 mm
- stand pipe 1 ¼” of stainless steel, polished, with top and bottom water inlet 1 ¼” female, total height 1040 mm
- connection pipe of stainless steel for easy installation and alignment of the shower, polished
- ball valve ½” of...
The eyewash can be easily mounted on all the spouts with thread 22x1 M and 24x1 F (adapter supplied). It can also be used as a normal spout. Flow balancer for a constant water supply
error Your review appreciation cannot be sent