Wall-mounted safety shower with manual opening, shower head CHROME FUSED BRASS
€316.64
Tax included
Wall-mounted emergency shower
- yellow color
- with manual opening
- Shower head Ø 90 in polished and chromed brass - threaded connection Ø 1". The depth of the holes Ø 8 and their special geometry ensure a water jet that is not strong but very covering 110 liters/minute at 2 bars. It automatically empties immediately after use and is easy to inspect.
Complies with standards: UNI EN 15154, ANSI Z358.1, DIN 12899-3
PremiumLine body safety shower with hand-held eye shower with one spray head 45°, floor mounted
- including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
- base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
- stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼”...
Safety shower for emergency decontamination and washbasin for rinsing the eyes.
Safety shower is used in facilities, rooms where chemicals, aggressive liquids are present and there is a possibility of spraying, spillage of a person with a dangerous liquid, acid or base. High quality safety shower. Consists of a shower and nozzles for rinsing the eyes with a sink. Activation via pull lever and...
PremiumLine body safety shower, floor mounted
- including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
- base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
- stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2330 mm
- connection piece of...
PremiumLine rod operated safety shower valve, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
- flow rate at least 60 l/min at 1 bar flow pressure
- opening angle 90°, not self-closing
- pull rod of stainless steel, length...
ClassicLine hand-held eye shower with one spray head, table mounted
- ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
- high-performance spray head for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps - integrated flow regulation 7 litre / minute for a...
ClassicLine safety shower arm, wall mounted, exposed pipework
- wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
- wall shower arm ¾“ made of stainless steel, chemical resistant green powder coated, projection 525 mm
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified...
PremiumLine safety shower combination, with safety eye shower, wall mounted, exposed pipework
- including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
- wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
- connection piece ¾” of stainless steel, for easy installation and alignment of the shower
-...
ClassicLine body safety shower with hand-held eye shower with two spray heads 45°, floor mounted
- including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
- base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
- stand pipe 1 ¼” of stainless steel three-part, chemical resistant...
ClassicLine hand-held eye shower with two spray heads, diagonal mounted
- ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
- high-performance spray heads for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps
- integrated flow regulation 14 litre / minute...
ClassicLine tank eyewash station with stainless steel tank
- tank of stainless steel, with a capacity of 16 litres
- water inlet via large flap lid on the tank, compressed air connection tyre inflation valve
- for mobile use or when no water connection is available
- actuation by activation of the hand-held eye shower
- hand-held eye shower with one spray head, mounting by wall bracket on the...
ClassicLine safety eye shower with two spray heads 45°, table mounted - Connection thread 1/2" male, length 60 mm, incl. fastening-parts kit with nut G1/2" with 2 screws M5 for difficult to access mounting, with distribution disc, rosette, sealing to table surface with O-Ring
- integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5...
ClassicLine safety shower arm, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
- ceiling shower arm ¾“ made of stainless steel, chemical resistant green powder coated, headroom 600 mm
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified...
Wall mounted Emergency eyes-washing. The product composes of a wall support, a bowl and two spigots. The bowl and the spigots are located on the top of the AISI 304 stainless steel wall support. The support of the spigots is inside the ABS bowl. The spigots and their support are made of chromed brass tube. The water supply must ensure a minimum flow of eyes-washing of 6l/min. at a pressure of...
ClassicLine body safety shower, ceiling mounted, exposed pipework
- ceiling flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
- ball valve ¾” of brass, with pull rod actuation, DIN-DVGW tested and certificated
- pull rod with ring handle of steel, chemical resistant green powder coated, length 700 mm
- ceiling shower arm ¾“ of...
- Shower head Ø 90 in polished and chromed brass - threaded connection Ø 1". The depth of the holes Ø 8 and their special geometry ensure a water jet that is not strong but very covering 110 liters/minute at 2 bars. It automatically empties immediately after use and is easy to inspect.
Complies with standards: UNI EN 15154, ANSI Z358.1, DIN 12899-3
error Your review appreciation cannot be sent