Ionic hair dryer "BISE" white 1800W
€99.90
Tax included
Ionic hair dryer white colour wall mount, made of high resistance ABS. Unit incorporates ion technology for a faster dry. It is able to provide an air flow of 120 m3/h at a speed of 59 km/h generated by a direct current motor of 10,000 r.p.m. It have a total power of 1800W at 220-240V - 50/60Hz and a projection protection Index IPX1 Class II. The heating element is 1202W - 230V with a thermal limiter. Unit is supplied with two USB sockets in the wall support and an air concentrator. The hair dryer has a 2-year limited manufacturer's warranty on materials
Trusted client
Trusted delivery
COMPONENTS AND MATERIALS
- Main body and base – Made of high impact ABS plastic.
- Protection grid – Made of polycarbonate.
- Fixing kit: Two 6mm wall plugs, two 4mm screws.
OPERATION
The base of the dryer has a general switch on the side with a pilot light
next to it that indicates if it is on. On the back of the gun handle it has a switch with three positions, “I” – low speed/low heating element (total power 500W), 'II'- high speed/medium heating element (total power 1005W) “III” - high speed/max heating element (total power 1800W). It has a button on the handle to turn off the heating element and get a cold flow of air. The unit is supplied with an air concentrator than can be easily fixed by the user if needed and 2 USB sockets in the wall support.
MOUNTING
Fix the hair dryer to the wall using the supplied screws. Always follow step by step the assembly instructions that you will find in the "Installation and assembly manual" supplied with the unit.
PL02 08 01 00
No customer reviews for the moment.
16 other products in the same category:
E-flow hand dryer aluminium silver 220-240V
The hot air hand dryer consists of a one-piece casing in 2,5 mm silver aluminium. The base-casing assembly which makes up the hand dryer is fixed to the wall by means of 4 holes with the dimensions for an 8 mm drill bit. The dryer is operated by an electronic infra-red sensor and it automatically stops after the hands have been withdrawn from the sensor field. The universal brushless motor,...
Classicflow hand dryer stainless steel brushed...
COMPONENTS & MATERIALS - Cover – 2mm white steel or 2mm AISI 304 stainless steel covers. Cover designed for heavy duty areas equipped with zamak 360º swivel nozzle. Nozzle is equipped with vandal-resistant grille. Cover is secured to mounting base with two tamper proof screws. - Mounting base – 1.5mm aluminium with four Ø 6mm mounting holes. Equipped with four silent blocks to diminish hand...
Stainless steel AISI 316L shower tower with...
COMPOSITION - Shower in stainless steel AISI 316L - Ground fixing structure included - G1/2” M water inlets supply OPERATING CHARACTERISTICS Operating pressure: Min 1 – max 6 bar Recommended pressure: 2 – 4 bar Water inlet temperature: 5 – 65 °C
€2,180.00
Tax included
Wall mounted stainless steel shower panel with...
COMPOSITION - Chromed brass tap - TMV3 thermostatic cartridge - Non-return valves - Vandal proof prison shower head OPERATING CHARACTERISTICS Operating pressure: Min 1 – max 5 bar Hot water inlet temperature: 50 – 63 °C (55 – 60 °C recommended) Cold water inlet temperature: 5 - 20 °C Minimum differential temperature (hot-mixed): 10 °C Outlet water temperature range: 15 – MAX °C Setting...
€950.00
Tax included
Basin single tap KIDS series
COMPOSITION - Chromed brass body - Copper pipes 1/2” female cm 20 - Epoxidic dust painting OPERATING CHARACTERISTICS Flow rate: 6 l/min (w/flow regulator) Operating pressure: Min 1 – max 6 bar Recommended pressure: 2 – 4 bar Water inlet temperature: 5 – 65 °C Water flow stop device: Cartridge with ceramic disks, ECO-STOP opening w/2 positions and maximum temperature control device (ring).
SLIM self closing shower panel with push button
COMPOSITION - Panel in aluminum, plastic ABS. - Flow rate limiter 8 l/min - Kit di fissaggio da parete - Wall fixing set - Connection for wall supply in brass. OPERATING CHARACTERISTICS Operating pressure: Min 1.5 – max 5 bar Recommended pressure: 2 – 4 [bar] Water temperature: 5 – 65 °C Flow rate: 8 l/min (w/flow limiter) Flow time: 25 sec. @ 3 bar (tollerace: +5/-10 sec.).
€284.90
Tax included
Wecflow hand dryer stainless steel polished
The hot air hand dryer consists of a one-piece casing in stainless steel with a polycarbonate grille on the bottom end and a base, made in ABS plastic, that serves as support for the volute-nozzle made in flameretardant thermoplastic. The base-casing assembly which makes up the hand dryer is fixed to the wall by means of 4 holes with the dimensions for an 8 mm drill bit. The dryer is operated...
Ionic hair dryer white colour wall mount, made of high resistance ABS. Unit incorporates ion technology for a faster dry. It is able to provide an air flow of 120 m3/h at a speed of 59 km/h generated by a direct current motor of 10,000 r.p.m. It have a total power of 1800W at 220-240V - 50/60Hz and a projection protection Index IPX1 Class II. The heating element is 1202W - 230V with a thermal limiter. Unit is supplied with two USB sockets in the wall support and an air concentrator. The hair dryer has a 2-year limited manufacturer's warranty on materials
error Your review appreciation cannot be sent