

PP pipes are used for drainage of storm water and fecal water. The tubes are designed and manufactured for a long service life. PP (HT) pipes and fittings for domestic sewage systems, together with appropriate couplings, are intended for the removal of all types of waste water inside buildings. They are characterized by easy installation. High-quality seals ensure that the joint is completely impervious.
Trusted client
Trusted delivery
16 other products in the same category:
Application: pumping stations, treatment plants, bio-gas plants, waterworks, hydroelectric power plants, dams, reservoirs. Water flow control gate. Water barriers for installation on canals, rivers, pipes, pumping stations, treatment plants and various technological facilities. Purpose: closing, regulating the flow of dirty or drinking water. Made of stainless material. Manufacture according to...
MATERIALS: Frame and ribs: Stainless steel AISI 304/304L - 1.4301/1.4307 or acid resistant AISI 316/316L - 1.4401/1.4404 or any other depending on customer requirements Shut-off plate: PEHD (High Density Polyethylene). Gaskets: EPDM (or other material depending on working conditions, e.g. NBR, VITON or silicone). Spindle: A2 or A4 stainless steel. TIGHTNESS: The penstock is tight up to 3m of...
Range: from DN50 to DN600. - Knife Gate Valve on/off or regulation with rising stem. - Molded monobloc body - Unidirectional water tightness: Flow direction indicated on the body with an arrow. - Installation between flanges ISO PN10. - Small retention zone. - Gate with a beveled cutting edge guided in the body with little backlash. - Guaranteed closure, without risk of blockage. - Standard...
- Operating temperature: -10°C to +70°C - Available diameters (dimensions): - DN50 [mm] for Type 6626 valves - Maximum medium flow rate: - liquid: max. 4 [m/s] - nominal pressure ratings (PN): - 1.0 MPa - 1.6 MPa Valves for gravity flow systems. The valve features a cast iron body that houses a loose ball inside (the closure). The body chamber is closed from the top by a cast-iron cover that...
Range: from DN200 to DN1500. -Body and plate in polyester resin reinforced with glass fibers. -Low mass structure with minimum face to face -Easy and quick instauration -Low pressure drop. -Installation at the end of the networks on a vertical wall or a standard flange. -Perfect seal ensured wih gasket conforming to standard NF EN681-1. Product advantage: -Low weight for high pressure...
Available in DN 100, 110, 125, 160 and 200, the valve is comprised of: a recyclable 20% glass fibre reinforced Polyamide body (PA6-20FCV) a recyclable 30% glass-ball reinforced PPH door a TPE lip seal over-moulded on the door to guarantee a seal at a low level of back pressure an over-moulded TPE pipe sleeve seal. Thanks to its material, the flap valve offers good resistance against corrosion...
error Your review appreciation cannot be sent