

Built-in wash-basin mixer high quality chrome plated finish, to be installed on a wall.
Tap with D40 ceramic cartridge and sliding cover plate made in brass.
Water economizer system based on limiting the tap flow, especially useful for a permanent control of water consumption.
Its slender silhouette will transform your bathroom into a space with its very own personality.
Trusted client
Trusted delivery
16 other products in the same category:
1) Body and cover made in brass according to UNE-EN 1982. 2) High-quality black mate finish. 3) G ½” standard connection. 4) Maximum temperature: 85°C. 5) Max. recommended temp.: 65°C. 6) Maximum pressure: 10 bar. 7) Minimum pressure: 0,5 bar. 8) Recommended pressure: 1 - 3 bar.
1) Body made in brass according to UNE-EN 1982. 2) Handle made in zamak. 3) Chrome plated according to EN 248. 4) D25 ceramic cartridge with top seal. 5) 5-liter anti-vandal economizer aerator. 6) Supplied with 8x1 connection set - H 3/8" at 50 cm DN6 and nut fixing system by means of a nut on a threaded tube. 7) Maximum temperature: 80 °C. 8) Max. recommended temp.: 65 °C. 9) Maximum pressure:...
1) Body made in brass according to UNE-EN 1982. 2) Handle made in Zamak. 3) Chrome plated according to EN 248. 4) 2 positions Ø40 ceramic cartridge. 5) Anti-lime M24x1 plastic aerator with chrome plated brass cover. 6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65 °C. 9)...
1) Made in brass according to UNE-EN1982. 2) Lever made in Zamak. 3) Chrome plated according to EN 248. 4) Guided outlet noiseless Ø35 ceramic cartridge. 5) Ceramic diverter. 6) Sliding and adjustable rotary holder. 7) Telescopic column with adjustable height. 8) Fitted with 1.5 m. chrome plated stainless steel flexible hose, adjustable sprayer with anti-lime jets and 3 anti-lime functions hand...
COMPONENTS AND MATERIALS - Concealed wall plate (2) – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with two Allen stainless steel screw. - Fixings set - Four Ø 6mm wall plugs, four Ø 4mm screws and one Allen key. OPERATION Suitable for hotel or...
1) Body made in brass according to UNE-EN 1982. 2) Chrome plated according to EN 248. 3) Handle and cover made in Zamak. 4) ¼ turn ceramic headwork. 5) Maximum temperature: 85 °C. 6) Max. recommended temp.: 65 °C. 7) Maximum pressure: 10 bar. 8) Minimum pressure: 0,5 bar. 9) Recommended pressure: 1 - 3 bar.
Photocell mixer in polished and chromed cast brass – built-in solenoid valve and battery that are easy to replace - anti-flooding function, stop after 60 seconds of continuous dispensing – anti-legionella function, dispensing for 45 seconds after 24 hours of non-use – power supply with normal 9V alkaline battery for about 100,000 uses (2 years) – top cover for battery replacement – supplied...
error Your review appreciation cannot be sent