

1) Body made in brass according to UNEEN 1982.
2) Handle made in Zamak.
3) Chromed according to EN 248.
4) Economizer 2 position free flow noiseless fi40 ceramic cartridge.
5) Anti-lime M24x1 plastic aerator with chromed brass cover.
6) Fitted with 35 cm long flexible connectors (M10x1; G 3/8”) andstainless steel horseshoe fixation set.
7) Minimum flow rate: 12 l/min (3 bar).
8) Maximum use temperature: 85 ºC.
9) Max. recommended temp.: 65 º C.
10) Maximum use pressure: 10 bar.
11) Minimum use pressure: 0,5 bar.
12) Recommended pressure: 1-5 bar.
Trusted client
Trusted delivery
16 other products in the same category:
1) Body and plate made in brass according to UNE-EN 1982. 2) Lever made in Zamak. 3) Black mate finish. 4) Guided outlet noiseless D35 ceramic cartridge. 5) Anti-lime female M18x1 plastic aerator with black mate brass cover. 6) Spout of 22 cm. 7) G ½” connectors. 8) Maximum temperature: 85 °C. 9) Max. recommended temp.: 65 °C. 10) Maximum pressure: 10 bar. 11) Minimum pressure: 0,5 bar. 12)...
1) Body made in brass according to UNE-EN 1982. 2) Chrome plated according to EN 248. 3) Anti-lime M18x1 plastic aerator with chrome plated cover. 4) Fitted with 40 cm long flexible connectors M10X1 F ⅜”, and fixation set. 5) Máximun temperature: 85°C. 6) Max. recommended temp.: 65°C. 7) Maximum pressure: 10 bar. 8) Minimum pressure: 0,5 bar. 9) Recommended pressure: 1 - 3 bar
1) Body made in brass according to UNE-EN 1982. 2) Lever made in Zamak. 3) Black mate finish. 4) 2 position D35 ceramic cartridge. 5) Anti-lime M18x1 plastic aerator with black mate brass cover. 6) Fitted with chain holder, 55 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set. 7) Maximum temperature: 85 °C. 8) Max. recommended temp.: 65 °C. 9) Maximum pressure: 10...
Opening time adjustable with the key supplied from 0 to about 50 seconds, with automatic device flow rate for a constant supply of 9 liters / minute from 0.5 to 9 bar. Brass cartridge with stainless steel pin and filters and with blue and red marker. Supplied with protection for masonry works - handle in chromed ABS with brass core - built-in flow balancer
1) Holder and cover made in brass according to UNE-EN 1982. 2) High-quality black mate finished. 3) Standard connection G ½” 4) Maximum temperature: 85 °C. 5) Max. recommended temp.: 65 °C. 6) Maximum pressure: 10 bar. 7) Minimum pressure: 0,5 bar. 8) Recommended pressure: 1 - 3 bar
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. This piece consists of the main bar holding the paper roll and the round snap flange hiding and fixing the rear plate....
1) Made in brass according to EN 12165 2) Chroming plate according to EN 248. 3) Overflow. 4) Removable cap.
1) Body and covers made in brass according to UNE-EN 1982. 2) Handles made in ABS. 3) Chrome plated according to EN 248. 4) Thermostatic anti-scalding noiseless cartridge. 5) Fitted with fixing brass made eccentrics. 6) Maximum temperature: 85 °C. 7) Max. recommended temp.: 65 °C. 8) Maximum pressure: 10 bar. 9) Minimum pressure: 0,5 bar. 10) Recommended pressure: 1 - 3 bar
error Your review appreciation cannot be sent