Reserve paper holder 304 stainless steel "NIMBUS SERIES"
€26.90
Tax included
Reserve paper holder has 2,5mm thickness, AISI 304 stainless steel, RAL 9004 matt black powder coated with a thickness of 115 µm. The main part is made up of the bar holding the roll paper in a vertical position and the round cover concealing the rear plate.
- Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws.
- Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. This piece consists of the main bar holding the paper roll and the round snap flange hiding and fixing the rear plate.
- Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen key.
OPERATION
Suitable for hotel or residential bathrooms. No specific operation instructions.
MOUNTING
Loosen main body bottom setscrew so wall plate can be removed. Drill two Ø 6mm holes to suit provided wall plugs (6mm) and screws (4mm) at S points indicated in technical design. Secure wall plate to the wall.
Place main body and tighten setscrew at the bottom so to secure with wall plate.
PL05770403
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Features:
1) Body, handle and covers made of brass according to UNE-EN 1982.
2) Chrome-plated according to EN 248.
3) Silent ceramic cartridge Ø35 insert.
4) Nozzle M18x1 made of brass, chrome.
5) Maximum temperature of use: 85 ° C.
6) Maximum recommended temperature: 65°C.
7) Maximum operating pressure: 10 bar.
8) Minimum operating pressure: 0.5 bar.
9) Recommended pressure: 1 - 5 bar.
COMPONENTS AND MATERIALS
- Concealed wall plates (2 units) – AISI 304 stainless steel. Secured to wall with two screws.
- Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plates with two stainless steel screws.
- Translucent round glass made of glass
- Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen...
COMPONENTS AND MATERIALS
- Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws.
- Main body –AISI 304 stainless steel, matt black powder coat (RAL 9004). Secured to wall plate with one Allen stainless steel screw. The product incorporates the open ring for towels and the rear round anchor cover for installation.
- Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws...
COMPONENTS AND MATERIALS
- Rear wall plate – AISI 304 stainless steel. Secured to wall with two screws.
- Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. The product incorporates two units of this hanger. Each hanger has an internal thread that allows
its installation by coupling to a threaded cylinder fixed to the wall through each of...
Flat grates are made of high-quality PE/PP recycled material.
They are used for landscaping, paths, gardens, parking lots. The recommended use of grass grates is on driveways, paths in parks, access routes for rescuers, parking lots, animal feedlots (pastures for animals), as they increase the load-bearing capacity of the soil even on wet terrain and prevent the destruction of the lawn.
For...
COMPONENTS AND MATERIALS
- Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws.
- Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw.
- Translucent round soap dish.
- Fixings set - Two Ø 6mm wall plugs, two Ø 4mm screws and one Allen key.
OPERATION...
Reserve paper holder has 2,5mm thickness, AISI 304 stainless steel, RAL 9004 matt black powder coated with a thickness of 115 µm. The main part is made up of the bar holding the roll paper in a vertical position and the round cover concealing the rear plate.
error Your review appreciation cannot be sent