Hanger zinc "Cartago series"
€7.90
Tax included
The product consists of a wall mount, a wall plate covering the wall mount and a single hanger. The hanger is made of injected zinc, has a diameter of 19 mm and a small round hole to help hang things. The wall plate covering the wall mount, which is fastened to the fixing support, is made of injected zinc and has a diameter of 56.5 mm and a thickness of 1.5 mm. The wall mount, made of carbon steel, has two holes so it can be fixed to the wall by means of screws. The assembled set has a chrome finish plated with 3.5-6 μm nickel + 2-3 μm chromium that provides it an appropriate resistance against corrosion. The product is anchored to a brick wall by means of 2 nylon wall plugs and 2 screws. The overall dimensions of the product are 56.5 x 56.5 x 54 mm.
Trusted client
Trusted delivery
PL05010502
No customer reviews for the moment.
16 other products in the same category:
Shower basket 304 stainless steel "NIMBUS SERIES"
COMPONENTS AND MATERIALS - Concealed wall plate (2) – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with two Allen stainless steel screw. - Fixings set - Four Ø 6mm wall plugs, four Ø 4mm screws and one Allen key. OPERATION Suitable for hotel or...
€48.40
Tax included
Paper holder with lid 304 stainless steel "NIMBUS...
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. This piece consists of the main bar holding the paper roll and the round snap flange hiding and fixing the rear plate....
€34.90
Tax included
OSLO Wall single lever sink mixer 15 cm
Features: 1) Body, handle and covers made of brass according to UNE-EN 1982. 2) Chrome-plated according to EN 248. 3) Silent ceramic cartridge Ø35 insert. 4) Nozzle M18x1 made of brass, chrome. 5) Maximum temperature of use: 85 ° C. 6) Maximum recommended temperature: 65°C. 7) Maximum operating pressure: 10 bar. 8) Minimum operating pressure: 0.5 bar. 9) Recommended pressure: 1 - 5 bar.
€137.90
Tax included
Double hanger 304 stainless steel "NIMBUS SERIES"
COMPONENTS AND MATERIALS - Rear wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. The product incorporates two units of this hanger. Each hanger has an internal thread that allows its installation by coupling to a threaded cylinder fixed to the wall through each of...
€16.40
Tax included
Reserve paper holder 304 stainless steel "NIMBUS...
COMPONENTS AND MATERIALS - Concealed wall plate – AISI 304 stainless steel. Secured to wall with two screws. - Main body –AISI 304 stainless steel, 2,5mm thickness. Matt black powder coat (RAL 9004), 115 µm thickness. Secured to wall plate with one Allen stainless steel screw. This piece consists of the main bar holding the paper roll and the round snap flange hiding and fixing the rear plate....
€26.90
Tax included
The product consists of a wall mount, a wall plate covering the wall mount and a single hanger. The hanger is made of injected zinc, has a diameter of 19 mm and a small round hole to help hang things. The wall plate covering the wall mount, which is fastened to the fixing support, is made of injected zinc and has a diameter of 56.5 mm and a thickness of 1.5 mm. The wall mount, made of carbon steel, has two holes so it can be fixed to the wall by means of screws. The assembled set has a chrome finish plated with 3.5-6 μm nickel + 2-3 μm chromium that provides it an appropriate resistance against corrosion. The product is anchored to a brick wall by means of 2 nylon wall plugs and 2 screws. The overall dimensions of the product are 56.5 x 56.5 x 54 mm.
error Your review appreciation cannot be sent