16 other products in the same category:
Range: from DN200 to DN1500.
-Body and plate in polyester resin reinforced with glass fibers.
-Low mass structure with minimum face to face
-Easy and quick instauration
-Low pressure drop.
-Installation at the end of the networks on a vertical wall or a standard flange.
-Perfect seal ensured wih gasket conforming to standard NF EN681-1.
Product advantage:
-Low weight for high pressure...
Available in DN 100, 110, 125, 160 and 200, the valve is comprised of:
a recyclable 20% glass fibre reinforced Polyamide body (PA6-20FCV) a recyclable 30% glass-ball reinforced PPH door a TPE lip seal over-moulded on the door to guarantee a seal at a low level of back pressure an over-moulded TPE pipe sleeve seal.
Thanks to its material, the flap valve offers good resistance against corrosion...
Water flow control gate. Water barriers for installation on canals, rivers, pipes, pumping stations, treatment plants and various technological facilities. Purpose: closing, regulating the flow of dirty or drinking water. Made of stainless material. Manufacture according to standard EN10088-1. Sliding elements manufactured according to EN 12163 Due to their properties and durability, they are...
Function ON/OFF or regulation. Wafer threaded mounting ISO PN10. Unidirectional tightness, direction indication thanks to the arrow on the body. Small retention zone: the gate is guided in the body and has little clearance. Gland assembly: packing and O-ring (same material as seat joint) to assure the elasticity and decrease the operating torque. Small head loss. Possibility to regulate thick...
- The housing and cover are made of 1.4301 stainless steel (AISI 304).
- NBR / EPDM valve circumferential seal according to ISO 1629
- Replaceable seal on the cover that prevents backflow.
- Detachable connections (screws, washers and nuts) that connect the elements are made of stainless steel.
- Nominal connection diameters in accordance with PN-EN ISO 6708.
- The valve designation meets...
Range: from DN50 to DN600.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard...
Range: from DN50 to DN1200.
- Knife Gate Valve on/off or regulation with rising stem.
- Molded monobloc body
- Unidirectional water tightness: Flow direction indicated on the body with an arrow.
- Installation between flanges ISO PN10.
- Small retention zone.
- Gate with a beveled cutting edge guided in the body with little backlash.
- Guaranteed closure, without risk of blockage.
- Standard...
error Your review appreciation cannot be sent