Thermostatic mixing valve for centralized systems factory preset at about 45°C – possibility of choosing the temperature rotating the handle and reading the immersion thermometer mounted on the body of the mixer – anti-scalding safety device – nickel plated.
Hot maximum temperature: 85°C
Control range: 20-65°C
Maximum pressure: 10 bar
WORKING CONDITIONS
Maximum working pressure:16 bar
Maximum working temperature : -10°C / 120°C
STANDARDS
Flange connection according to EN 1092-2 ISO PN 16.
Test pressure according to EN 12266-1, DIN 3230, BS 6755 and ISO 5208.
DESCRIPTION
Solution to solve plant problems due to particle pollution, especially sand and rust that are formed due to corrosion and scale during the normal operation of a system.
OPERATING PRINCIPLE
Through its effective and constant action, the magnetic fi lter collects
all the impurities present in the system, preventing them from circulating within it, thus avoiding wear and damage of the...
APPLICATION:
The 80l horizontal diaphragm tank for cold water is designed to be assembled with a pump with accessories. As a result of such assembly and after adding an anti-vibration hose with an elbow, we get a compact and relatively small hydrophore set. When selecting the size of the tank, it should be taken into account that the amount of water available between turning the pump off and...
1. Acid condensation neutralising filter for condensing boilers
2. Body construction in transparent PA polyamide
3. Hose connection caps / fittings in PA polyamide
4. Wall fixing bracket Polymer
5. Neutralising medium holding net. AISI 304 stainless steel
6. Neutralising medium carbonate CaCo3. Available as a spare part
7. EPDM PEROX as a hydraulic seal
8. Connection on boiler with hose...
The proposed valves have an oblique seat which offers a good adjustment precision and a resistance lower than the valves with a straight seat: head losses are small, flow more important for a same DN leads.
Mounting on pipes is preferred direction indicated by an arrow on the body. The balancing valve can be used as a « stop valve. A thrust allows memorizing the valve adjustment, without...
APPLICATION:
The 50l horizontal diaphragm tank for cold water is designed to be assembled with a pump with accessories. As a result of such completion and after adding an anti-vibration hose with an elbow, we get a compact and relatively small hydrophore set. When selecting the size of the tank, it should be taken into account that the amount of water available between turning the pump off and...
1. Brass construction acc/ UNE-EN 12165 nickel plated.
2. Gas (BSP) threaded M-F ends acc/ ISO 228/1.
3. Maximum working pressure 16 bar (PN 16).
4. Working temperature from -20ºC to 110ºC
5. Standard tare at 8 bar ±0.5 bar.
6. Outlet for hose connection.
USE:
The 8-liter expansion tank for cold water is designed to be mounted on a small hydrophoric pump with accessories. As a result of such assembly, we get a very compact and small hydrophore set.
Multipurpose tank with replaceable membrane for closed heating systems.
An expansion tank with a replaceable membrane is one of the elements of protection of closed central heating systems....
1. Removes impurities, maintaining optimal system efficiency
2. Main body and flanges steel painted
3. Cover Stainless steel
4. Ball valve body and air vent valve in brass
5. EPDM PEROX as a hydraulic seal
6. Stainless steel filter 100 microns
7. 4 Magnetic elements Neodymium 12.000 Gauss.
8. Flanged PN16 connections
9. Pair of pressure gauges scale 0-10 bar
10. Dosing point connection 3/8”
11....
APPLICATION:
The 24l horizontal diaphragm tank for cold water is designed to be assembled with a small pump with accessories (e.g. type WZ JY, JET). As a result of such completion and after adding an anti-vibration hose with an elbow, we get a compact and relatively small hydrophore set.
The tank uses a flexible diaphragm that divides the space in the tank into two parts. Water is stored in...
1. The balancing valve is a single component device having adjustment functions and that measures cold and hot fluids transiting inside closed and open systems with following advantages:
• Micrometric adjusting of the transfer flow.
• Indicator of calibration reading of numerical value on the valve's hand wheel.
• Possibility of checking circuit via indirect measuring of flow rate using...
error Your review appreciation cannot be sent