Ball straight valve for gas with feet, M-PE pipe connection

Ball straight valve for gas with autoblock, M-M

Ball straight valve for gas, M-M

Spindle extension rigid

Made of ductile cast iron EN-GJS 400-15, the possibility of shortening the mounting surface area. Galvanized steel squere section 18mm. Ductile cast iron EN-GJS 400-15 coupling mounted on the valve spindle with the split cotter. Extension spindle liner cap pipe bell and thrust washer made of PE. Pipe bell protects against dirt penetration from the ground.

Ball straight valve for gas, F-hose connection

Flexible connection with safety valve M-F - GAS DN 8

Rigid extension spindle with Cardan joint

Soft-sealed flanged gas valve

• Stainless steel spindle with rolled thread • Flange connection according to EN 1092-2; (DIN 2501) pressure PN10; PN16 • Product in accordance with EN 13774 • Packing cork protected against dirt penetration • Epoxy coating at least 250 microns in accordance with EN 14901 GSK RAL certificate • Low-friction double-spindle bearing that works horizontally and vertically • Sealing cork...

Ball angle valve for gas - butterfly, M-F sliding nutt

Soft-sealed flanged gas valve, F5

• Stainless steel spindle with rolled thread • Flange connection according to EN 1092-2; (DIN 2501) pressure PN10; PN16 • Product in accordance with EN 13774 • Packing cork protected against dirt penetration • Epoxy coating at least 250 microns in accordance with EN 14901 GSK RAL certificate • Low-friction double-spindle bearing that works horizontally and vertically • Sealing cork...

Angle ball valve for gas, M-M

Ball valve for gas full bore flanged

• Ball seat made of replaceable PTFE • The ball is made of stainless steel grade 1.4301 • NBR or Viton spindle seal + Teflon ring • The construction of the valve allows disassembly • Corrosion protection according to EN 14901 • Stainless steel spindle improved in class 1.4021 • Ductile iron body EN-GJS 350-22-LT • Product according to EN 13774; EN 1983 • Interchangeable spindle seals •...

Road cap for H270 gas valves

Straight flanged gas filter

Use: Gas filters type PL 7310 (inclined flow) and type PL 7320 (straight flow) are intended for filtering natural gas (liquid group 1 in accordance with Directive 2014/68 / EU). Filters can be used in overhead installations in vertical or horizontal pipelines. Technical specification: All (100%) filters are leak tested. The tests check the exterior and tightness of the bonnet. All production...

Ball straight valve for gas, F-F

Flexible connection with safety valve - GAS DN 8

Angle ball valve for gas, M-F

1. Brass according to UNE-EN 12164 - 12165 2. Chrome-plated surface finishing 3. NBR joints according to EN 549 4. PTFE seats 5. Thread ends male-female according to ISO 7/1 (EN 10226-1) 6. Guaranteed for the use of Natural Gas 7. Pressure class MOP 5 (0 to 5 bar) 8. Work temperature: from -20ºC to 60ºC 9. The valves can be blocked (at closed position) and sealed 10. Stem with double NBR...