Activflo Catalytic Water Regenerator Against Limescale
€463.60
Tax included
What is the ACTIVFLO Water Regenerator?
ActivFlo is a catalytic water regenerator designed to protect and reduce scale build-up in liquid systems. The unit is designed to be installed on a potable water supply line or as a stand-alone protection on components.
Inside the ActivFlo Commercial High Class is a unique patented catalytic alloy made from a combination of semi-precious metals that react with water. As water flows through the ActivFlo, the natural conductivity of the water causes the metals to react with each other and create an electrical field on the surface of the patented alloy, causing calcium and bicarbonate ions to precipitate from the water to form insoluble microscopic crystals of calcium carbonate called aragonite. The smooth surface of this aragonite crystal cannot adhere to surfaces in the same way as quicklime and evaporates on surfaces such as shower screens, making residue much easier to remove and requiring no chemicals or other harsh cleaning agents.
Limescale builds up in hard water areas, especially when water is heated. As water heats up, its ability to hold calcium in solution decreases and the water can become oversaturated with calcium ions. The ActivFlo Commercial High Class uses catalytic water treatment, has no wires, requires no electricity or salt and does not add or remove anything from the water.
Benefits:
- No need to use electricity
- Simple and easy to install
- No maintenance required
- High quality 316 stainless steel housing
- 30+ year lifespan
- Suitable for whole house protection
- Made in the UK
- Patented innovative product
- Improves and maintains the efficiency of heating equipment
- Up to 50% less soap and detergent needed
- No stains on stainless steel sinks and countertops
- Improves some dry skin conditions
- Better tap water
PL_IDR_09027
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
1. Check valve.
2. Brass construction acc/ UNE-EN 12165.
3. Thread ends gas (BSP) female acc/ ISO 228/1.
4. Working temperature from -20ºC to 100ºC.
5. Suitable for domestic water services, heating on
air-conditioning plants and compressed air systems.
6. It can be fitted in horizontal, vertical or oblique position.
7. With inlet strainer.
8. NBR sealing (rubber) 65 shore.
9. Stainless steel...
It is a shower made of HPL, a latest generation technopolymer with low environmental impact and very high resistance to corrosion and impact.
Inside it is equipped with a 30L water tank which is heated by the exposure to the sun. With optimal installation and temperature settings, the tank can be heated from 12 °C to 34 °C within one hour.
The 15-second self closing tap allows for additional...
The dryer is the result of many years of development and testing. It is developed and manufactured in Slovenia, Europe. It is made of quality stainless materials that guarantee a long service life. The dryer is equipped with automation that regulates and controls the drying of walnuts, hazelnuts, and fruit. Automation adjusts the operation of the dryer based on external factors and the fruits...
Features:
1) Body and spout made of brass according to UNE-EN 1982.
2) Handle made of Zamak.
3) Chrome-plated according to EN 248.
4) Built-in Ø40 ceramic silent cartridge.
5) Aerator made of M24x1 plastic with anti-calcification system. Brass body, chrome plated.
6) Equipped with 35 cm long flexible hoses (M10x1; G ⅜”) made of stainless steel. Mounting kit.
7) Minimum flow: 12 l / min...
Ongoing climate change is causing more and more extreme phenomena - from droughts to torrential rains. Retention, i.e. the possibility of temporary retention of water is made possible by a line of flexible tanks. A well-organized reservoir not only enables the reuse of rainwater, improves the water balance or reduces costs, but also limits local flooding. The flexible, quick-installation tank...
1) Body made in brass according to UNE-EN 1982.
2) Lever made in Zamak.
3) Black mate finish.
4) 2 position D35 ceramic cartridge.
5) Anti-lime M18x1 plastic aerator with black mate brass cover.
6) Fitted with chain holder, 55 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended temp.: 65 °C.
9) Maximum pressure: 10...
OPERATING CONDITIONS
- Liquid temperature up to 35°C
(for home use according to EN 60335-2-41)
Max. liquid temperature: 35°C (for other uses)
- Ambient temperature up to 40°C
MOTOR
- r.p.m. 3600
- Start system recoil
- Tank capacity 3,6 lt
MATERIALS
- Pump body Aluminium
- Motor Support Aluminium
- Impeller Cast Iron
- Mechanical seal Ceramic
- Graphite/NBR
1) Body made in brass according to UNE-EN1982
2) Handle made in Zamak.
3) Chrome plated according to EN 248.
4) Guided outlet noiseless Ø40 ceramic cartridge.
5) Anti-lime M24x1 plastic aerator with chrome plated brass cover.
6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended temp.:...
Body of Stainless Steel AISI 304L
Connection parts of brass CW617N
EPDM seals and silent blocks
Polymer Hand wheels and caps
Derivation connection: G 3/4” (ISO 228) EUROKONUS
Connections on line: Female 1" (ISO 228)
Max. working pressure: 6 bar
Max circuit test pressure: 10 bar (at 20°C)
Differential pressure Δp max.: 1 bar
Maximum working temperature: 70°C
Fluid allowed: Water or Water +...
1. The zone valve is intended for use in control terminal units such as fan-coil and boxes in heating, ventilation, and air conditioning systems.
2. The valves can be used with hot and cold water in the temperature range from 0 ºC (nonfreezing) to 94 ºC.
3. The valve is driven by hysteresis synchronous motor with spring return.
4. There are two types of motorized valves: normally closed 2-way...
Cooler with larger dimensions that provides high stability and durability.
Great hygienic protection through a special shell with anti-vandalism finish.
Height of the water jet can be regulated through the high precision valve.
The separation between the push button and the water jet provides more comfort.
Easily regulated cold water temperature (thermostat).
Furthermore the possibility to...
ActivFlo is a catalytic water regenerator designed to protect and reduce scale build-up in liquid systems. The unit is designed to be installed on a potable water supply line or as a stand-alone protection on components.
error Your review appreciation cannot be sent