C. Outdoor recreational facilities and winter sports resorts
A modern device designed specifically for the outlined function, incorporating a zinc-coated steel structure, electrostatically
painted – color RAL 7035, structure. Leveling feet, retractable power cord, L = 2.3 m long. Patent lock. The cabinet has an intuitive electronic controller with adjustable drying time and temperature, ventilation function and a humidity indicator. Overload protection against fire and against uncontrolled temperature rise. The inside of the cabinet contains a frame with direct airflow allowing the drying of 28 pairs of shoes or gloves.
INSTALLATION
Operation recommended in a dry room with a temperature above 15°C. The cabinet should be connected to a ventilation duct.
Power supply from 230 V mains.
DRYING PROCESS
The load should be distributed on the rods in such a way that it does not block the air flow through the rod and allows the penetration of air inside the load. The heated air dries the load from the inside, then moves to the top of the chamber. Part of the air is directed to the outside, drawing moisture from the cabinet to the ventilation duct, and the rest is recirculated. The turbulent air flow in the cabinet ensures that the drying process is precise and relatively short (therefore economical).
The device for drying clothes is also useful in sports centers, recreational centers and resorts and ski centers. It serves as a drying agent for jerseys, sportswear and footwear, as well as body armor, thus extending their lifespan and reducing the formation of odors and bacteria.
The dryer is characterized by its versatility, high quality, innovative solution safety, adaptability,...
The device for drying clothes is also useful in sports centers, recreational centers and resorts and ski centers. It serves as a drying agent for jerseys, sportswear and footwear, as well as body armor, thus extending their lifespan and reducing the formation of odors and bacteria.
The dryer is characterized by its versatility, high quality, innovative solution safety, adaptability,...
Submersible pumps are aggregates made entirely of stainless steel, installed in wells with a minimum diameter of 110mm. They are designed for pumping clean, cold water that does not contain solid grinding or long-fiber elements.
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 68
Winding insulation class B
Number of starts up to [x / hour] 20
Minimum cooling flow of the...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 20
Working position vertical
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
The WQ 750F pump is a durable, compact submersible pump designed for pumping dirty water, as well as rainwater and gray water containing organic impurities with a maximum diameter not exceeding 25mm. The WQ 750F has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running. The WQ submersible pumps are used to pump out...
Technical data:
Maximum water temperature 30°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Cast iron pump housing
Cast iron impeller
Stainless steel cutting system
Cast iron pump lid
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Aluminum pump housing
PPO technopolymer impeller
Stainless steel inlet screen
Cast iron rotor chamber housing
• Working with medium under pressure
• Robust workmanship
• Resistant to abrasion and UV radiation
• Light weight
• Flat - at rest
• Large selection of sizes
Temperature of the medium 0°C ÷ 60°C
Bursting pressure 6 bar
Working pressure 4 bar
External enclosure PE
Inner casing PE
Reinforcement polyester
A discharge hose that can be rolled up significantly reduces the hydraulic performance of the...
APPLICATION:
The pumps are used to supply single-family houses, holiday homes, gardening, enterprises, workshops, etc. with clean, cold water from your own intake. The pump has the ability to suck water from a depth not exceeding 8 m.
Technical data:
Maximum water temperature 35 ° C
Protection degree IP 44
Material execution:
Stainless steel pump shaft
Stainless steel impeller
Discharge...
The WZ Smart PM hydrophore is a compact device which, thanks to the use of a frequency converter and electronic control, maintains a constant water pressure in the installation, selected by the user. Due to the above control solution and the use of PM type motors (with permanent magnets), the WZ SMART PM series hydrophore is characterized by high efficiency and consumes much less electricity...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 30
Working position vertical
material version:
Cast iron pump housing
Cast iron impellers
Stainless steel inlet screen
Cast iron pump lid
Maximum capacity: 110 l/min
Maximum lifting height: 30 m
Motor power: 0.8 kW
Voltage: 230V
discharge port: 1"
Power cable length: 10 m
Size of impurities max.: 1 mm
Technical data:
Maximum water temperature 35°C
Degree of protection IP X8
Maximum immersion depth [meters] 7
material version:
Stainless steel pump housing
Technopolymer impellers
Suction screen made of impact-resistant material...
The WQ 2200 submersible pump for gray water, rainwater, drainage, dirty water and sewage has a wide range of applications, it can be used both in agriculture, agritourism and single-family houses, as well as municipal enterprises or in production and technological processes. WQ 2200 is adapted to continuous operation in difficult conditions, has a float control which controls its activation...
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 5
Working position vertical
material version:
Cast iron pump housing
Cast iron impeller
Stainless steel cutting system
Cast iron pump lid
Maximum capacity: 315 l/min
Maximum lifting height: 13 m
Motor power: 1.1 kW
Voltage: 230V
discharge port: 2"
Power cable length: 8 m
Technical data:
Maximum water temperature 35°C
Degree of protection IP 68
Maximum immersion depth [meters] 10
Vertical work position
material version:
Stainless steel pump housing
Cast iron impeller
Stainless steel shredding system
Pump shaft stainless steel
The submersible pump with a grinder is dedicated to pumping sewage, slurry and dirty water with the presence of organic and household contaminants. The pump has an efficient grinding system which initially cuts the pumped medium into pieces, thanks to which there is no clogging of the discharge section in the pipeline. The pump has a float control which controls switching on depending on the...
error Your review appreciation cannot be sent