OPERATING CONDITIONS
- Liquid temperature up to 35°C
(for home use according to EN 60335-2-41)
Max. liquid temperature: 35°C (for other uses)
- Ambient temperature up to 40°C
MOTOR
- r.p.m. 3600
- Start system recoil
- Tank capacity 3,6 lt
MATERIALS
- Pump body Aluminium
- Motor Support Aluminium
- Impeller Cast Iron
- Mechanical seal Ceramic
- Graphite/NBR
1. Check valve.
2. Brass construction acc/ UNE-EN 12165.
3. Thread ends gas (BSP) female acc/ ISO 228/1.
4. Working temperature from -20ºC to 100ºC.
5. Suitable for domestic water services, heating on
air-conditioning plants and compressed air systems.
6. It can be fitted in horizontal, vertical or oblique position.
7. With inlet strainer.
8. NBR sealing (rubber) 65 shore.
9. Stainless steel...
Maximum capacity: 23 l/min
Maximum lifting height: 24 m
discharge port: 1"x1"
Technical data:
Operating temperature range 35°C
material version:
Cast iron housing
Cast iron piston
Advantages:
- faster and easier work
- you do not need heavy construction machinery for laying - developing
- easy shaping and adaptation to the terrain
- special patented heat preservation system
1. The Polymer manifold for floor systems enables parallel feed of terminal fluidic terminals.
2. Limited dimensions that enable the insertion in boxes to be walled in partitioning walls
3. Manual or automatic on-off interception of the single circuits.
4. Adjustment of the flow in transit for balancing between the various circuits by means of flowmeters mounted on the manifold and equipped...
1. Brass according to UNE-EN 12164 - 12165
2. Chrome-plated surface finishing
3. NBR joints according to EN 549
4. PTFE seats
5. Thread ends male-female according to ISO 7/1 (EN 10226-1)
6. Guaranteed for the use of Natural Gas
7. Pressure class MOP 5 (0 to 5 bar)
8. Work temperature: from -20ºC to 60ºC
9. The valves can be blocked (at closed position) and sealed
10. Stem with double NBR...
The problem with works, if we focus on construction, is that these works take place in a certain area for a certain period of time. The construction of a standard anti-noise fence itself would make the construction project (construction of a house, hospital, school or park) much more expensive, and a standard anti-noise fence would also get in the way in certain parts and prevent the rapid...
Guaranteed for the use of cold and hot water80ºC Maximum Pressure: 8 bar20ºC Maximum Pressure: 16 barMinimum Temperature -10ºCNominal Pressure: PN 16 bar (200PSI)Threads according to ISO 228/1 (DIN259)Quick closing on both handles (1/4 turn)Packing gland in the stem Body and bonnet in nickel-plated brass (UNE EN 12165)
The WQ 250F pump is a compact submersible pump designed for pumping dirty, rainy and gray water containing organic pollutants with a maximum diameter not exceeding 18mm. WQ 250F has a float control which controls its activation depending on the level of the pumped medium and protects the pump against dry running. The pump is additionally equipped with an overcurrent protection on the power...
The advantage of flexible, quick-to-install tanks and reservoirs is their quick installation and cleaning, quality manufacturing and easy transportation. Nowadays, we are faced with constant weather changes. A certain period is very rainy and water is a problem for us, we can defend against it with Planteh portable flood barriers. During the sunny, warm period, it happens that there is a...
1) Body made in brass according to UNE-EN1982
2) Handle made in Zamak.
3) Chrome plated according to EN 248.
4) Guided outlet noiseless Ø40 ceramic cartridge.
5) Anti-lime M24x1 plastic aerator with chrome plated brass cover.
6) Fitted with chain holder, 40 cm long flexible connectors 10x1 F 3/8" and stainless steel horseshoe fixing set.
7) Maximum temperature: 85 °C.
8) Max. recommended temp.:...
1. Maximum working pressure 10 bar (PN2. Brass according to UNE-EN 12165.
3. Thread female ends gas (BSP) acc/ ISO 228/ 1.
4. NBR 65 Sh sealing.
5. Working temperature from 0ºC to 90ºC.
6. Suitable for all kinds of hydraulic and pneumatic installations.
Cooler with larger dimensions that provides high stability and durability.
Great hygienic protection through a special shell with anti-vandalism finish.
Height of the water jet can be regulated through the high precision valve.
The separation between the push button and the water jet provides more comfort.
Easily regulated cold water temperature (thermostat).
Furthermore the possibility to...
error Your review appreciation cannot be sent